AutoCodes – Honda – P0606 2010 Honda Accord

P0606 2010 Honda Accord Code - ECM Processor Malfunction

Quick Answer

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming, Faulty Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0606 2010 Honda Accord indicates ECM Processor Malfunction.
Common causes: Common causes include Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming, Faulty Engine Control Module (ECM).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,900

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0606 2010 Honda Accord Description

The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. This selfâˆ’check insures that the ECM is functioning properly. If any malfunction is detected, the ECM will set the code and illuminate the engine light.

OBDII Code P0606 2010 Honda Accord - ECM Processor Malfunction - AutoCodes.com — P0606 2010 Honda Accord Code - ECM Processor Malfunction

What does this mean?

What are the Possible Causes of the DTC P0606 2010 Honda Accord?

Engine Control Module (ECM) Harness power supply circuit is open or shorted
Engine Control Module (ECM) Programming
Faulty Engine Control Module (ECM)

How to Fix the DTC P0606 2010 Honda Accord?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Check the ECM fuse, if fuse is OK try erasing the code first and if the code comes back you may have to reprogram or replaced the ECM.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0606 2010 Honda Accord code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0606 2010 Honda Accord code?

Need more information on how to fix the P0606 2010 Honda Accord code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0606 2010 Honda Accord code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0606 2010 Honda Accord Code

1. What does the OBDII code P0606 mean on a 2010 Honda Accord?

The P0606 code indicates an ECM (Engine Control Module) Processor Malfunction in the vehicle's computer system.

2. What are the common symptoms of a P0606 code on a 2010 Honda Accord?

Common symptoms of a P0606 code may include engine stalling, rough idling, poor acceleration, and illuminated check engine light.

3. What are the possible causes of a P0606 code on a 2010 Honda Accord?

Potential causes of a P0606 code include a faulty ECM, damaged wiring or connectors, software issues, or a weak battery or charging system.

4. How can I diagnose a P0606 code on my 2010 Honda Accord?

Diagnosing a P0606 code typically involves inspecting the ECM, checking for loose connections, testing the battery and charging system, and using diagnostic tools to assess the software.

5. Can I still drive my 2010 Honda Accord with a P0606 code?

It is not recommended to drive your vehicle with a P0606 code as it can lead to further damage and potential safety risks. Have the issue diagnosed and repaired as soon as possible.

6. How can I reset the P0606 code on my 2010 Honda Accord?

Resetting the P0606 code can be done using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes. However, the underlying issue must be addressed to prevent the code from reappearing.

7. Is it safe to continue driving if the check engine light is on due to a P0606 code?

Driving with the check engine light on due to a P0606 code is not advisable as it indicates a malfunction in the ECM, which can impact the vehicle's performance and reliability.

8. How much does it cost to repair a P0606 code on a 2010 Honda Accord?

The cost of repairing a P0606 code can vary depending on the underlying issue. It is recommended to consult a professional mechanic for an accurate diagnosis and cost estimate.

9. Can a DIY enthusiast fix a P0606 code on a 2010 Honda Accord?

While some basic troubleshooting steps can be taken by a DIY enthusiast, diagnosing and repairing a P0606 code often requires specialized tools and expertise. It is best to consult a professional mechanic for proper diagnosis and repair.

10. How can I prevent a P0606 code from occurring on my 2010 Honda Accord?

To prevent a P0606 code, it is important to maintain your vehicle properly, address any warning lights promptly, and avoid electrical issues by ensuring a healthy battery and charging system. Regular maintenance and inspections can help prevent ECM malfunctions.