P0606 2008 Ford Fusion Code - Powertrain Control Module Internal Communication Error
Quick Answer
The Powertrain Control Module (PCM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Powertrain Control Module (PCM) Harness power supply circuit is open or shorted, Powertrain Control Module Programming, Faulty Powertrain Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0606 2008 Ford Fusion indicates Powertrain Control Module Internal Communication Error.
- Common causes
- Common causes include Powertrain Control Module (PCM) Harness power supply circuit is open or shorted, Powertrain Control Module Programming, Faulty Powertrain Control Module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0606 2008 Ford Fusion Description
What are the Possible Causes of the DTC P0606 2008 Ford Fusion?
- Powertrain Control Module (PCM) Harness power supply circuit is open or shorted
- Powertrain Control Module Programming
- Faulty Powertrain Control Module
How to Fix the DTC P0606 2008 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0606 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0606 2008 Ford Fusion code?
Need more information on how to fix the P0606 2008 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0606 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0606 2008 Ford Fusion Code
What does the OBDII code P0606 mean for a 2008 Ford Fusion?
P0606 indicates an internal communication error within the Powertrain Control Module (PCM), which may suggest a malfunction or failure in the PCM itself.
What are the symptoms of the P0606 code in a 2008 Ford Fusion?
Symptoms may include engine stalling, poor performance, difficulty starting the vehicle, or the check engine light illuminating.
What causes the P0606 code in a 2008 Ford Fusion?
Common causes include a faulty PCM, software corruption, electrical issues such as damaged wiring or poor connections, or voltage irregularities from the battery or alternator.
Can a faulty battery trigger the P0606 code in a 2008 Ford Fusion?
Yes, a weak or failing battery can cause voltage irregularities that may lead to PCM communication errors and trigger the P0606 code.
How do you diagnose the P0606 code in a 2008 Ford Fusion?
Start by inspecting the battery, wiring, and connections for damage or corrosion. Then test the PCM using a diagnostic tool to confirm internal failure or software issues.
Can the P0606 code be fixed without replacing the PCM?
In some cases, the code may be resolved by repairing wiring issues, updating PCM software, or addressing voltage problems, but a PCM replacement might be necessary if it's defective.
How much does it cost to replace the PCM in a 2008 Ford Fusion?
PCM replacement typically costs between $500 and $1,500, including parts and labor, depending on location and repair shop rates.
Is it safe to drive with the P0606 code on a 2008 Ford Fusion?
Driving with this code can be risky as it may lead to engine stalling or unpredictable vehicle behavior, so repairs should be addressed promptly.
Can a software update fix the P0606 code on a 2008 Ford Fusion?
Yes, if the issue is related to corrupted or outdated software, a PCM reprogramming or update may resolve the problem.
Should you clear the P0606 code before fixing the issue?
No, clearing the code without addressing the root cause can lead to recurring issues and may make diagnosing the problem more difficult.
Discuss the causes and fixes for P0606 2008 Ford Fusion OBDII Code
Code P0606 2008 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
