P0606 2005 Scion xB Code - ECM Processor Error
Quick Answer
The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0606 2005 Scion xB indicates ECM Processor Error.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0606 2005 Scion xB Description
The ECM memory status is diagnosed by internal mirroring of the main CPU and the sub CPU to detect Random Access Memory (RAM) errors. The two CPUs also perform continuous mutual monitoring. The ECM illuminates the MIL and sets a DTC if: 1) outputs from the two CPUs are different or deviate from the standards, 2) the signals sent to the throttle actuator deviate from the standards, 3) a malfunction is found in the throttle actuator supply voltage, and 4) any other ECM malfunction is found.
What are the Possible Causes of the DTC P0606 2005 Scion xB?
- Faulty Engine Control Module (ECM)
- Engine Control Module (ECM) Harness power supply circuit is open or shorted
- Engine Control Module (ECM) Programming
How to Fix the DTC P0606 2005 Scion xB?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0606 2005 Scion xB code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0606 2005 Scion xB code?
Need more information on how to fix the P0606 2005 Scion xB code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0606 2005 Scion xB code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0606 2005 Scion xB Code
1. What is the OBDII code P0606 on a 2005 Scion xB?
The OBDII code P0606 on a 2005 Scion xB indicates an ECM (Engine Control Module) Processor Error.
2. What are the common symptoms of a P0606 code in a 2005 Scion xB?
Common symptoms of a P0606 code in a 2005 Scion xB may include engine stalling, rough idling, poor acceleration, and the illumination of the Check Engine Light.
3. What are the potential causes of a P0606 code in a 2005 Scion xB?
Potential causes of a P0606 code in a 2005 Scion xB include a faulty ECM, wiring issues, software glitches, or other electronic control module malfunctions.
4. How can I diagnose a P0606 code in a 2005 Scion xB?
Diagnosing a P0606 code in a 2005 Scion xB typically involves using a diagnostic scanner to read the code, checking for other related codes, inspecting the ECM and its connections, and performing a thorough visual inspection of the wiring.
5. Can a P0606 code be cleared/reset in a 2005 Scion xB?
Yes, a P0606 code can be cleared/reset in a 2005 Scion xB using a diagnostic scanner. However, it is important to address the underlying cause of the code to prevent it from reoccurring.
6. How serious is a P0606 code in a 2005 Scion xB?
A P0606 code in a 2005 Scion xB should be addressed promptly as it can lead to drivability issues and potential engine performance problems if left unresolved.
7. Can I drive my 2005 Scion xB with a P0606 code?
It is not recommended to drive your 2005 Scion xB with a P0606 code, as it may result in further damage to the ECM or other components. It is best to have the issue diagnosed and repaired before driving the vehicle.
8. What are some repair tips for fixing a P0606 code in a 2005 Scion xB?
Repair tips for fixing a P0606 code in a 2005 Scion xB include checking and repairing any damaged wiring, ensuring proper ECM connections, and, if necessary, replacing the ECM with a new or refurbished unit.
9. Can a DIY enthusiast fix a P0606 code in a 2005 Scion xB?
While some DIY enthusiasts may be able to diagnose and repair a P0606 code in a 2005 Scion xB, it is recommended to seek professional help, especially when dealing with complex electronic control module issues.
10. How much does it cost to repair a P0606 code in a 2005 Scion xB?
The cost to repair a P0606 code in a 2005 Scion xB can vary depending on the underlying cause of the issue. It is advisable to obtain quotes from reputable mechanics or service centers for an accurate estimate.
Discuss the causes and fixes for P0606 2005 Scion xB OBDII Code
Code P0606 2005 Scion xB comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
