AutoCodes – Nissan – P0605 2010 Nissan Rogue

P0605 2010 Nissan Rogue Code - Engine Control Module Fault

Quick Answer

The Engine Control Module (ECM) continuously monitors its own internal memory status, internal circuits, and output signals transmitted to the throttle actuator. Common causes include Engine Control Module (ECM) may be faulty, ECM harness power supply circuit is open or shorted, ECM harness ground circuit is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0605 2010 Nissan Rogue indicates Engine Control Module Fault.
Common causes: Common causes include Engine Control Module (ECM) may be faulty, ECM harness power supply circuit is open or shorted, ECM harness ground circuit is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,284

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 22, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0605 2010 Nissan Rogue Description

The Engine Control Module (ECM) continuously monitors its own internal memory status, internal circuits, and output signals transmitted to the throttle actuator. This self-check insures that the ECM is functioning properly. If any malfunction is detected, the ECM sets the P0605 code and illuminates the MIL.

OBDII Code P0605 2010 Nissan Rogue - Engine Control Module Fault - AutoCodes.com — P0605 2010 Nissan Rogue Code - Engine Control Module Fault

What does this mean?

What are the Possible Causes of the DTC P0605 2010 Nissan Rogue?

Engine Control Module (ECM) may be faulty
ECM harness power supply circuit is open or shorted
ECM harness ground circuit is open or shorted

How to Fix the DTC P0605 2010 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Try erasing the code first, if the light comes back ON you may have to replace the ECM to repair the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0605 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0605 2010 Nissan Rogue code?

Need more information on how to fix the P0605 2010 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0605 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0605 2010 Nissan Rogue Code

1. What does OBDII code P0605 mean on a 2010 Nissan Rogue?

The code P0605 indicates a fault in the Engine Control Module (ECM) of the vehicle.

2. What are the common symptoms of an ECM fault represented by code P0605 in a 2010 Nissan Rogue?

Common symptoms include engine stalling, rough idling, poor acceleration, and issues with starting the vehicle.

3. What are the potential causes of the P0605 code in a 2010 Nissan Rogue?

The P0605 code in a 2010 Nissan Rogue can be triggered by a malfunctioning ECM, electrical issues, software glitches, or wiring problems.

4. How can I diagnose the P0605 code on my 2010 Nissan Rogue?

Diagnosing the P0605 code usually involves using a diagnostic scanner to retrieve the fault code, checking the ECM connections, inspecting the wiring harness for damage, and testing the ECM for proper functioning.

5. Can the P0605 code be cleared and reset in a 2010 Nissan Rogue?

While the P0605 code can be cleared using a diagnostic scanner, it is important to address the underlying issue causing the fault in the ECM to prevent the code from reoccurring.

6. Is it safe to continue driving my 2010 Nissan Rogue with the P0605 code present?

It is not recommended to drive the vehicle with the P0605 code active, as it can lead to further damage to the ECM and other engine components.

7. How much does it typically cost to repair the P0605 code on a 2010 Nissan Rogue?

The cost of repairing the P0605 code in a 2010 Nissan Rogue can vary depending on the underlying cause, but it may range from a few hundred to a couple of thousand dollars.

8. Can I repair the ECM myself to fix the P0605 code on my 2010 Nissan Rogue?

Repairing or replacing the ECM to address the P0605 code usually requires advanced technical knowledge and specialized tools, so it is recommended to seek professional help.

9. Are there any preventative measures to avoid the P0605 code in a 2010 Nissan Rogue?

Regular maintenance, such as checking and cleaning the ECM connections, inspecting the wiring harness for damage, and keeping the vehicle's electrical system in good condition, can help prevent the P0605 code from appearing.

10. Will fixing the P0605 code improve the overall performance of my 2010 Nissan Rogue?

Addressing the P0605 code and repairing the ECM fault can help restore the proper functioning of the engine control system, leading to improved performance, fuel efficiency, and overall drivability of the vehicle.