AutoCodes – Nissan – P0605 2008 Nissan Rogue

P0605 2008 Nissan Rogue Code - Engine Control Module Fault

Quick Answer

The Engine Control Module (ECM) continuously monitors its own internal memory status, internal circuits, and output signals transmitted to the throttle actuator. Common causes include Engine Control Module (ECM) may be faulty, ECM harness power supply circuit is open or shorted, ECM harness ground circuit is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0605 2008 Nissan Rogue indicates Engine Control Module Fault.
Common causes: Common causes include Engine Control Module (ECM) may be faulty, ECM harness power supply circuit is open or shorted, ECM harness ground circuit is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,558

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 22, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0605 2008 Nissan Rogue Description

The Engine Control Module (ECM) continuously monitors its own internal memory status, internal circuits, and output signals transmitted to the throttle actuator. This self-check insures that the ECM is functioning properly. If any malfunction is detected, the ECM sets the P0605 code and illuminates the MIL.

OBDII Code P0605 2008 Nissan Rogue - Engine Control Module Fault - AutoCodes.com — P0605 2008 Nissan Rogue Code - Engine Control Module Fault

What does this mean?

What are the Possible Causes of the DTC P0605 2008 Nissan Rogue?

Engine Control Module (ECM) may be faulty
ECM harness power supply circuit is open or shorted
ECM harness ground circuit is open or shorted

How to Fix the DTC P0605 2008 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Try erasing the code first, if the light comes back ON you may have to replace the ECM to repair the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0605 2008 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0605 2008 Nissan Rogue code?

Need more information on how to fix the P0605 2008 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0605 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0605 2008 Nissan Rogue Code

1. What does OBDII code P0605 mean for a 2008 Nissan Rogue?

The P0605 code indicates a malfunction in the Engine Control Module (ECM) or Powertrain Control Module (PCM).

2. What are the common symptoms of a P0605 code in a 2008 Nissan Rogue?

Common symptoms include engine stalling, rough idling, poor acceleration, and the illumination of the Check Engine Light.

3. What are the possible causes of a P0605 code in a 2008 Nissan Rogue?

Causes may include a faulty ECM/PCM, damaged wiring or connectors, software issues, or a weak car battery.

4. How serious is a P0605 code in a 2008 Nissan Rogue?

A P0605 code should be addressed promptly as it can potentially lead to drivability issues and affect the overall performance of the vehicle.

5. Can I still drive my 2008 Nissan Rogue with a P0605 code?

It is not recommended to drive the vehicle with a P0605 code as it may result in further damage to the engine or other components.

6. How can I diagnose and repair a P0605 code in my 2008 Nissan Rogue?

Diagnosis typically involves checking the ECM/PCM for proper functioning and inspecting related wiring. Repair may involve ECM/PCM replacement or reprogramming.

7. Can a DIYer fix a P0605 code in a 2008 Nissan Rogue?

While some DIYers may be able to address simpler causes like loose connections, diagnosing and repairing more complex issues may require professional expertise.

8. How much does it cost to fix a P0605 code in a 2008 Nissan Rogue?

The cost of fixing a P0605 code can vary depending on the underlying cause, but it may range from a few hundred to over a thousand dollars, including parts and labor.

9. How long does it take to repair a P0605 code in a 2008 Nissan Rogue?

The repair time for a P0605 code can vary based on the specific issue, but it may take a few hours to a full day to diagnose and address the problem.

10. Can resetting the ECM clear a P0605 code in a 2008 Nissan Rogue?

Resetting the ECM may temporarily clear the code, but if the underlying issue is not fixed, the code is likely to reappear. It's important to diagnose and repair the root cause.