P0604 2011 Toyota Camry Code - Internal Control Module Random Access Memory Error
Quick Answer
The Engine Control Module (ECM) continuously monitors its internal memory status, internal circuits, and output signals to the throttle actuator. Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0604 2011 Toyota Camry indicates Internal Control Module Random Access Memory Error.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) Harness power supply circuit is open or shorted, Engine Control Module (ECM) Programming.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0604 2011 Toyota Camry Description
The ECM memory status is diagnosed by internal mirroring of the main CPU and the sub CPU to detect Random Access Memory (RAM) errors. The two CPUs also perform continuous mutual monitoring. The ECM illuminates the MIL and sets a DTC if: 1) outputs from the two CPUs are different or deviate from the standards, 2) the signals sent to the throttle actuator deviate from the standards, 3) a malfunction is found in the throttle actuator supply voltage, and 4) any other ECM malfunction is found.
What are the Possible Causes of the DTC P0604 2011 Toyota Camry?
- Faulty Engine Control Module (ECM)
- Engine Control Module (ECM) Harness power supply circuit is open or shorted
- Engine Control Module (ECM) Programming
How to Fix the DTC P0604 2011 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0604 2011 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0604 2011 Toyota Camry code?
Need more information on how to fix the P0604 2011 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0604 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0604 2011 Toyota Camry Code
1. What does the OBDII code P0604 mean on a 2011 Toyota Camry?
P0604 indicates an "Internal Control Module Random Access Memory (RAM) Error," meaning the Engine Control Module (ECM) has detected a fault in its RAM operations.
2. What are the symptoms of code P0604 in a 2011 Toyota Camry?
Common symptoms include the check engine light turning on, poor engine performance, stalling, difficulty starting, or erratic transmission shifting.
3. What causes the P0604 code in a 2011 Toyota Camry?
This code can be caused by a faulty ECM, electrical issues like poor connections or damaged wiring, or in rare cases, a software glitch in the ECM.
4. Can I drive my 2011 Toyota Camry with a P0604 code?
While the car may still be drivable, it's not recommended as the issue could cause performance problems and lead to further damage if not addressed.
5. How is the P0604 code diagnosed in a 2011 Toyota Camry?
A mechanic will use a scan tool to confirm the code, inspect the wiring and connections to the ECM, and perform tests to verify if the ECM is faulty.
6. How do I fix the P0604 code on my 2011 Toyota Camry?
Repairs may involve repairing or replacing damaged wiring, reprogramming or updating ECM software, or replacing the ECM if it's determined to be defective.
7. How much does it cost to fix the P0604 code in a 2011 Toyota Camry?
Repair costs can vary, but ECM replacement typically ranges from $500 to $1,500, depending on parts and labor. Diagnosing and fixing wiring issues may cost less.
8. Does the P0604 code mean I need a new ECM for my 2011 Toyota Camry?
Not always. The issue could be caused by wiring or software problems, so a proper diagnosis is essential before replacing the ECM.
9. Can a dead battery cause a P0604 code in a 2011 Toyota Camry?
A weak or dead battery can sometimes trigger ECM-related codes, including P0604, if the ECM loses power or experiences voltage fluctuations.
10. Will clearing the P0604 code fix the problem in my 2011 Toyota Camry?
Clearing the code may temporarily turn off the check engine light, but if the underlying issue isn’t resolved, the code will likely return.
Discuss the causes and fixes for P0604 2011 Toyota Camry OBDII Code
Code P0604 2011 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
