P0603 2014 Chevrolet Silverado Code - Control Module Long Term Memory Reset
Quick Answer
This diagnostic applies to internal microprocessor integrity conditions within the Engine Control Module (ECM). Common causes include Low battery voltage, Reprogram Engine Control Module (ECM), Faulty Engine Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0603 2014 Chevrolet Silverado indicates Control Module Long Term Memory Reset.
- Common causes
- Common causes include Low battery voltage, Reprogram Engine Control Module (ECM), Faulty Engine Control Module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0603 2014 Chevrolet Silverado Description
What are the Possible Causes of the DTC P0603 2014 Chevrolet Silverado?
- Low battery voltage
- Reprogram Engine Control Module (ECM)
- Faulty Engine Control Module
- Engine Control Module harness is open or shorted
- Engine Control Module circuit poor electrical connection
How to Fix the DTC P0603 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0603 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0603 2014 Chevrolet Silverado code?
Need more information on how to fix the P0603 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0603 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0603 2014 Chevrolet Silverado Code
1. What does the OBDII code P0603 mean on a 2014 Chevrolet Silverado?
P0603 indicates that the Engine Control Module (ECM) has detected a long-term memory reset, which can affect the vehicle's performance and stored data.
2. What are common symptoms of code P0603 on a 2014 Chevrolet Silverado?
Symptoms may include the check engine light turning on, erratic engine performance, stalling, or loss of adaptive memory settings like fuel trim and idle control.
3. What causes the P0603 code to appear on a 2014 Chevrolet Silverado?
Common causes include a disconnected or weak battery, faulty ECM, poor electrical connections, or aftermarket tuning modifications.
4. Can a weak battery cause the P0603 code on a 2014 Silverado?
Yes, a weak or failing battery can disrupt power to the ECM, leading to a long-term memory reset and triggering the P0603 code.
5. How can I fix the P0603 code on a 2014 Chevrolet Silverado?
Start by checking the battery and charging system, inspecting electrical connections to the ECM, and restoring factory settings if aftermarket tuning is present. Replace the ECM if it’s determined to be faulty.
6. Will the P0603 code cause drivability issues on a 2014 Chevrolet Silverado?
In some cases, it may cause drivability issues like stalling, rough idling, or reduced fuel efficiency due to loss of adaptive settings.
7. Can aftermarket tuning trigger the P0603 code on a 2014 Chevrolet Silverado?
Yes, aftermarket performance tuning or reprogramming of the ECM can cause this code by altering the memory settings.
8. How do I diagnose the P0603 code on a 2014 Chevrolet Silverado?
Check for battery and alternator health, inspect wiring and connectors to the ECM, and verify if any aftermarket modifications have been made to the vehicle.
9. Is it safe to drive with the P0603 code on a 2014 Chevrolet Silverado?
It may be safe to drive temporarily, but the underlying issue should be addressed promptly to avoid potential performance problems or further damage.
10. How much does it cost to fix the P0603 code on a 2014 Chevrolet Silverado?
Repair costs can vary depending on the cause. Battery replacement may cost $100–$200, while ECM replacement could range from $500–$1,500 including labor.
Discuss the causes and fixes for P0603 2014 Chevrolet Silverado OBDII Code
Code P0603 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
