P0603 2010 Nissan Sentra Code - Engine Control Module Power Supply Circuit
Quick Answer
Battery voltage is supplied to the Engine Control Module (ECM) even when the ignition switch is turned OFF for the ECM memory function of the DTC memory, the air-fuel ratio feedback compensation value memory, the idle air volume learning value memory, etc. Common causes include Loose or poor battery terminal connection, Low battery charge, Faulty Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0603 2010 Nissan Sentra indicates Engine Control Module Power Supply Circuit.
- Common causes
- Common causes include Loose or poor battery terminal connection, Low battery charge, Faulty Engine Control Module (ECM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0603 2010 Nissan Sentra Description
What are the Possible Causes of the DTC P0603 2010 Nissan Sentra?
- Loose or poor battery terminal connection
- Low battery charge
- Faulty Engine Control Module (ECM)
- ECM power supply circuit is open or shorted
- ECM Outdated Program
How to Fix the DTC P0603 2010 Nissan Sentra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0603 2010 Nissan Sentra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0603 2010 Nissan Sentra code?
Need more information on how to fix the P0603 2010 Nissan Sentra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0603 2010 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0603 2010 Nissan Sentra Code
1. What does the OBDII code P0603 mean on a 2010 Nissan Sentra?
P0603 indicates an issue with the Engine Control Module (ECM) power supply circuit, specifically an internal control module keep-alive memory (KAM) error.
2. What are the common symptoms of a P0603 code in a 2010 Nissan Sentra?
Common symptoms include a check engine light, poor engine performance, rough idling, stalling, or trouble starting the vehicle.
3. What causes the P0603 code on a 2010 Nissan Sentra?
Potential causes include a faulty ECM, a weak or disconnected battery, corroded or loose battery terminals, damaged wiring to the ECM, or an improper ECM ground connection.
4. Can a weak car battery trigger the P0603 code in my Sentra?
Yes, a weak or failing battery can cause voltage fluctuations that trigger the P0603 code due to an interruption in the ECM’s power supply.
5. How do I diagnose the P0603 code on my 2010 Nissan Sentra?
Start by checking the battery voltage and connections, inspect the ECM power and ground wiring, and test the ECM for proper functionality using a scan tool or multimeter.
6. Is it safe to drive my 2010 Nissan Sentra with a P0603 code?
Driving may still be possible, but the engine could experience performance issues. Prolonged driving without addressing the issue may lead to further damage.
7. How do I fix the P0603 code on a 2010 Nissan Sentra?
Repairs may include replacing the battery, cleaning or tightening battery terminals, repairing damaged ECM wiring, or replacing the ECM if it is faulty.
8. Can disconnecting the battery clear the P0603 code in my Sentra?
Disconnecting the battery may temporarily reset the code, but it will likely return if the underlying issue is not resolved.
9. How much does it cost to repair the P0603 code on a 2010 Nissan Sentra?
Costs vary depending on the cause, ranging from $50 for a battery terminal cleaning to several hundred dollars for ECM replacement.
10. Can a loose ground connection cause the P0603 code in my 2010 Nissan Sentra?
Yes, a poor ECM ground connection can disrupt the power supply, triggering the P0603 code. Inspect and secure all ground connections.
Discuss the causes and fixes for P0603 2010 Nissan Sentra OBDII Code
Code P0603 2010 Nissan Sentra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
