AutoCodes – Ford – P0602 2006 Ford Fusion

P0602 2006 Ford Fusion Code - Powertrain Control Module Programming Error

Quick Answer

Configurable Powertrain Control Module (PCM) accommodates a variety of vehicle options, eliminating the need for many unique modules for one vehicle line. Common causes include Reprogram Module ("Flashing"), New Powertrain Control Module (PCM) Needs programming, Incorrect Vehicle Identification (VID) configuration. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0602 2006 Ford Fusion indicates Powertrain Control Module Programming Error.
Common causes: Common causes include Reprogram Module ("Flashing"), New Powertrain Control Module (PCM) Needs programming, Incorrect Vehicle Identification (VID) configuration.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,313

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 03, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0602 2006 Ford Fusion Description

Configurable Powertrain Control Module (PCM) accommodates a variety of vehicle options, eliminating the need for many unique modules for one vehicle line. These modules must be configured when replaced as part of a repair procedure. Configurable modules should not be exchanged between vehicles since the settings are unique to each vehicle. Failure to configure a new module may result in improper operation.
This Diagnostic Trouble Code (DTC) indicates that the Vehicle Identification (VID) block is not programmed or is corrupt.

OBDII Code P0602 2006 Ford Fusion - Powertrain Control Module Programming Error - AutoCodes.com — P0602 2006 Ford Fusion Code - Powertrain Control Module Programming Error

What does this mean?

What are the Possible Causes of the DTC P0602 2006 Ford Fusion?

Reprogram Module ("Flashing")
New Powertrain Control Module (PCM) Needs programming
Incorrect Vehicle Identification (VID) configuration

How to Fix the DTC P0602 2006 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Using the scan tool, reprogram the Vehicle Identification (VID) block. If the Powertrain Control Module (PCM) does not allow reprogramming of the VID block, reflashing PCM will be required.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0602 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0602 2006 Ford Fusion code?

Need more information on how to fix the P0602 2006 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0602 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0602 2006 Ford Fusion Code

1. What does the OBDII code P0602 mean for a 2006 Ford Fusion?

The P0602 code indicates a powertrain control module (PCM) programming error on a 2006 Ford Fusion.

2. What are the common symptoms of a P0602 code on a 2006 Ford Fusion?

Common symptoms of a P0602 code may include engine stalling, rough idle, poor fuel efficiency, or issues with acceleration.

3. What are the possible causes of a P0602 code on a 2006 Ford Fusion?

Possible causes of a P0602 code include a faulty PCM, incorrect programming, damaged wiring, or a weak battery.

4. Can a P0602 code on a 2006 Ford Fusion cause the vehicle to not start?

Yes, a severe PCM programming error indicated by a P0602 code can potentially prevent the vehicle from starting.

5. How can a P0602 code on a 2006 Ford Fusion be diagnosed?

Diagnosing a P0602 code typically involves using an OBDII scanner to read the code, checking for any other related codes, and inspecting the PCM and its connections.

6. Can a P0602 code on a 2006 Ford Fusion be repaired at home?

While some basic checks like inspecting wiring connections can be done at home, resolving a P0602 code often requires professional diagnostics and programming tools.

7. Is it safe to continue driving a 2006 Ford Fusion with a P0602 code?

It is not recommended to continue driving a vehicle with a P0602 code as it may lead to further damage or safety risks.

8. How much does it typically cost to repair a P0602 code on a 2006 Ford Fusion?

The cost of repairing a P0602 code can vary depending on the exact cause, but it may range from a few hundred to a few thousand dollars, including parts and labor.

9. Can resetting the PCM clear a P0602 code on a 2006 Ford Fusion?

Resetting the PCM may temporarily clear the code, but if the underlying issue is not addressed, the P0602 code is likely to reappear.

10. How often does a P0602 code occur in a 2006 Ford Fusion?

The occurrence of a P0602 code in a 2006 Ford Fusion is relatively rare, but it can happen due to various factors affecting the PCM's programming or functionality.