P0601 Jeep Code - Power Control Module Internal Fault
Quick Answer
The Powertrain Control Module (PCM) monitors itself. Common causes include Reprogram Powertrain Control Module (PCM), Faulty Powertrain Control Module, Powertrain Control Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0601 Jeep indicates Power Control Module Internal Fault.
- Common causes
- Common causes include Reprogram Powertrain Control Module (PCM), Faulty Powertrain Control Module, Powertrain Control Module harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0601 Jeep Description
What are the Possible Causes of the DTC P0601 Jeep?
- Reprogram Powertrain Control Module (PCM)
- Faulty Powertrain Control Module
- Powertrain Control Module harness is open or shorted
- Powertrain Control Module circuit poor electrical connection
- Low battery voltage
How to Fix the DTC P0601 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0601 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0601 Jeep code?
Need more information on how to fix the P0601 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0601 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0601 Jeep Code
1. What does the OBDII code P0601 mean on a Jeep?
P0601 indicates an internal fault in the Power Control Module (PCM), meaning the PCM has detected a memory checksum error.
2. What are the common symptoms of a P0601 code in a Jeep?
Symptoms may include the check engine light turning on, poor engine performance, stalling, difficulty starting, or the vehicle entering limp mode.
3. What causes the P0601 code in a Jeep?
The code is usually caused by an internal failure of the PCM, such as corrupted memory or a hardware defect. Electrical issues like poor connections or voltage spikes may also contribute.
4. Can I continue driving my Jeep with a P0601 code?
While the vehicle may still run, driving with a P0601 code is not recommended as it could lead to further engine issues or leave you stranded due to PCM failure.
5. How do you diagnose a P0601 code on a Jeep?
Diagnosis involves scanning the PCM for additional codes, inspecting wiring and connections to the PCM, and confirming the fault using specialized diagnostic tools.
6. Can a P0601 code be fixed without replacing the PCM?
In rare cases, cleaning and reconnecting corroded or loose electrical connections can resolve the issue, but most often, the PCM needs replacement.
7. How much does it cost to fix a P0601 code on a Jeep?
Replacing the PCM can cost between $500 and $1,200, depending on the model and whether you use a remanufactured or new unit. Additional labor charges may also apply.
8. Does a P0601 code mean the PCM is completely useless?
Yes, in most cases, the PCM is considered non-repairable when this code appears, as the internal memory or hardware is compromised.
9. Can resetting the PCM clear the P0601 code?
Clearing the code with a scan tool may temporarily turn off the check engine light, but the code will likely return if the PCM fault persists.
10. Should I reprogram the replacement PCM for a P0601 code?
Yes, the new PCM must be programmed to match your Jeep’s specifications, including the VIN and any other relevant parameters.
Discuss the causes and fixes for P0601 Jeep OBDII Code
Code P0601 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
