AutoCodes – Jeep – P0582 Jeep

P0582 Jeep Code - Speed Control Vacuum Solenoid Condition

Quick Answer

The Engine Control Module (ECM) monitors the Cruise Control Vacuum Control Circuit. Common causes include Faulty Vacuum Solenoid, Vacuum Solenoid harness is open or short, Vacuum Solenoid circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P0582 Jeep indicates Speed Control Vacuum Solenoid Condition.
Common causes: Common causes include Faulty Vacuum Solenoid, Vacuum Solenoid harness is open or short, Vacuum Solenoid circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 9,364

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 28, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0582 Jeep Description

The Engine Control Module (ECM) monitors the Cruise Control Vacuum Control Circuit. The ECM sets the OBDII code when the Cruise Control Vacuum Control Circuit is not to factory specifications.

OBDII Code P0582 Jeep - Speed Control Vacuum Solenoid Condition - AutoCodes.com — P0582 Jeep Code - Speed Control Vacuum Solenoid Condition

What does this mean?

What are the Possible Causes of the DTC P0582 Jeep?

Faulty Vacuum Solenoid
Vacuum Solenoid harness is open or short
Vacuum Solenoid circuit poor electrical connection

How to Fix the DTC P0582 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0582 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0582 Jeep code?

Need more information on how to fix the P0582 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0582 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0582 Jeep Code

1. What are the common symptoms of OBDII code P0582 in a Jeep related to the Speed Control Vacuum Solenoid?

- Common symptoms include the check engine light coming on, speed control system malfunctions, and potential issues with cruise control operation.

2. What typically causes the OBDII code P0582 in a Jeep related to the Speed Control Vacuum Solenoid?

- The code is often triggered by a faulty speed control vacuum solenoid, damaged wiring or connectors, vacuum leaks, or issues with the speed control vacuum supply.

3. How can I diagnose the cause of OBDII code P0582 in my Jeep?

- Diagnose the code by checking the speed control vacuum solenoid, inspecting related wiring and connectors for damage, testing vacuum lines for leaks, and ensuring proper vacuum supply to the system.

4. Can I continue driving my Jeep with OBDII code P0582 active?

- It is generally safe to drive the vehicle with this code, but it is recommended to address the underlying issue promptly to prevent potential speed control system malfunctions.

5. How can I repair OBDII code P0582 in my Jeep related to the Speed Control Vacuum Solenoid?

- Repair options include replacing the speed control vacuum solenoid, repairing or replacing damaged wiring or connectors, fixing vacuum leaks, and ensuring proper vacuum supply to the system.

6. Are there any DIY tips for fixing OBDII code P0582 in a Jeep?

- DIY tips include checking and cleaning the vacuum lines, inspecting and repairing damaged wiring, and replacing the speed control vacuum solenoid if necessary.

7. Will resetting the check engine light resolve OBDII code P0582 in my Jeep?

- Resetting the check engine light may temporarily clear the code, but it will likely return if the underlying issue with the Speed Control Vacuum Solenoid is not addressed.

8. How much does it typically cost to repair OBDII code P0582 in a Jeep at a mechanic or dealership?

- The cost of repair can vary depending on the specific issue, but it may range from around $100 to $300 for parts and labor.

9. Can a faulty speed control vacuum solenoid affect the overall performance of my Jeep?

- Yes, a faulty speed control vacuum solenoid can impact the performance of the speed control system and may lead to issues with cruise control operation.

10. Is OBDII code P0582 a common issue in Jeep vehicles?

- While not extremely common, OBDII code P0582 related to the Speed Control Vacuum Solenoid can occur in Jeep vehicles, particularly in older models or those with high mileage.