P0580 2014 GMC Sierra Code - Cruise Control Multifunction Switch Circuit Low Voltage
Quick Answer
The Cruise Control Switch is an input to the Body Control Module (BCM). Common causes include Faulty Cruise Control Switch, Cruise Control Switch harness is open or shorted, Cruise Control Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0580 2014 GMC Sierra indicates Cruise Control Multifunction Switch Circuit Low Voltage.
- Common causes
- Common causes include Faulty Cruise Control Switch, Cruise Control Switch harness is open or shorted, Cruise Control Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0580 2014 GMC Sierra Description
What are the Possible Causes of the DTC P0580 2014 GMC Sierra?
- Faulty Cruise Control Switch
- Cruise Control Switch harness is open or shorted
- Cruise Control Switch circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC P0580 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0580 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0580 2014 GMC Sierra code?
Need more information on how to fix the P0580 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0580 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0580 2014 GMC Sierra Code
1. What does the OBDII code P0580 mean on a 2014 GMC Sierra?
P0580 indicates a "Cruise Control Multifunction Switch Circuit Low Voltage" issue, meaning the vehicle's computer has detected a low voltage signal from the cruise control multifunction switch circuit.
2. What are the common symptoms of code P0580 in a 2014 GMC Sierra?
Common symptoms include the cruise control system not functioning, the cruise control light not illuminating, or intermittent operation of the cruise control.
3. What causes the P0580 code in a 2014 GMC Sierra?
Possible causes include a faulty cruise control multifunction switch, damaged or corroded wiring, a poor electrical connection, or a malfunctioning clock spring in the steering column.
4. Can I drive my 2014 GMC Sierra with the P0580 code active?
Yes, the vehicle can still be driven, but the cruise control system may not work. However, it's recommended to address the issue to avoid further electrical problems.
5. How do I diagnose the P0580 code on a 2014 GMC Sierra?
Start by checking the cruise control switch for proper operation and inspect the wiring and connectors for damage or corrosion. Use a multimeter to test for voltage in the circuit.
6. How do I fix the P0580 code on a 2014 GMC Sierra?
Repairs may involve replacing the cruise control multifunction switch, repairing damaged wiring, cleaning corroded connectors, or replacing a faulty clock spring.
7. What tools are needed to resolve the P0580 code on a 2014 GMC Sierra?
You may need a multimeter, a diagnostic scan tool, and basic hand tools to inspect, test, and replace components in the cruise control circuit.
8. Could a dead battery cause the P0580 code in a 2014 GMC Sierra?
A dead or weak battery is unlikely to directly cause this code, but electrical issues such as low voltage can contribute to erratic operation of the cruise control system.
9. How much does it cost to repair the P0580 code on a 2014 GMC Sierra?
Repair costs can vary depending on the issue. Replacing the cruise control switch might cost $50–$150 for parts, while clock spring replacement can cost $200–$400, including labor.
10. Can I reset the P0580 code without fixing the problem on a 2014 GMC Sierra?
You can clear the code with a scan tool, but the issue will likely return if the underlying problem is not resolved.
Discuss the causes and fixes for P0580 2014 GMC Sierra OBDII Code
Code P0580 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
