AutoCodesBuick – P057E Buick

P057E Buick Code - Brake Pedal Position Sensor Circuit Erratic

Quick Answer

The Brake Pedal Position (BPP) sensor is used to sense the action of the driver's application of the brake pedal. Common causes include Brake Pedal Position Sensor Calibration, Faulty Brake Pedal Position Sensor, Brake Pedal Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P057E Buick indicates Brake Pedal Position Sensor Circuit Erratic.
Common causes
Common causes include Brake Pedal Position Sensor Calibration, Faulty Brake Pedal Position Sensor, Brake Pedal Position Sensor harness is open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 935
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jul 14, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P057E Buick Description

The Brake Pedal Position (BPP) sensor is used to sense the action of the driver's application of the brake pedal. The Brake Pedal Position Sensor provides an analog voltage signal that will increase as the brake pedal is applied. The Brake Pedal Position Sensor contains 2 potentiometer-type brake pedal position sensors. When the pedal is pressed, the voltage of one sensor goes up and the voltage of the other sensor goes down. The Diagnostic Trouble Code (DTC) will be set when the Brake Pedal Position Sensor signal is noisy or erratic.
OBDII Code P057E Buick - Brake Pedal Position Sensor Circuit Erratic - AutoCodes.com
P057E Buick Code - Brake Pedal Position Sensor Circuit Erratic

What are the Possible Causes of the DTC P057E Buick?

  • Brake Pedal Position Sensor Calibration
  • Faulty Brake Pedal Position Sensor
  • Brake Pedal Position Sensor harness is open or shorted
  • Brake Pedal Position Sensor circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P057E Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P057E Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P057E Buick code?

Need more information on how to fix the P057E Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P057E Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P057E Buick Code

1. What does OBDII code P057E mean on a Buick?

P057E indicates an issue with the Brake Pedal Position Sensor Circuit, where the sensor's output is erratic or inconsistent.

2. What are the common symptoms of code P057E in a Buick?

Symptoms may include erratic braking behavior, malfunctioning cruise control, illuminated brake or ABS warning lights, and reduced brake system performance.

3. What causes code P057E in a Buick?

Common causes include a faulty brake pedal position sensor, damaged wiring or connectors in the sensor circuit, or issues with the vehicle’s electronic control module (ECM).

4. Can I drive my Buick with code P057E active?

Driving with P057E is not recommended, as it may affect braking performance and safety features like cruise control or ABS.

5. How do I fix code P057E on my Buick?

Repairs typically involve inspecting and replacing the brake pedal position sensor, repairing damaged wiring, or updating the ECM software if necessary.

6. How much does it cost to fix code P057E in a Buick?

Repair costs vary but typically range from $100 to $300, depending on whether the sensor or wiring needs replacement.

7. Where is the brake pedal position sensor located in a Buick?

The brake pedal position sensor is usually mounted on or near the brake pedal assembly in the driver’s footwell.

8. Can a dead battery cause code P057E in a Buick?

A dead or weak battery is unlikely to directly cause P057E but can lead to electrical issues that may affect the sensor circuit.

9. How do I diagnose code P057E in a Buick?

Diagnosis involves scanning for codes, visually inspecting the sensor and wiring, testing the sensor’s voltage output, and checking for ECM updates.

10. Will clearing the code P057E solve the problem permanently?

Clearing the code may temporarily remove the warning, but the underlying issue must be fixed to prevent the code from returning.

Discuss the causes and fixes for P057E Buick OBDII Code

Code P057E Buick comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play