AutoCodes – GMC – P057E 2016 GMC Sierra

P057E 2016 GMC Sierra Code - Brake Pedal Position Sensor Circuit Erratic

Quick Answer

The Brake Pedal Position (BPP) sensor is used to sense the action of the driver's application of the brake pedal. Common causes include Brake Pedal Position Sensor Calibration, Faulty Brake Pedal Position Sensor, Brake Pedal Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P057E 2016 GMC Sierra indicates Brake Pedal Position Sensor Circuit Erratic.
Common causes
Common causes include Brake Pedal Position Sensor Calibration, Faulty Brake Pedal Position Sensor, Brake Pedal Position Sensor harness is open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 145
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jul 14, 2022
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P057E 2016 GMC Sierra Description

The Brake Pedal Position (BPP) sensor is used to sense the action of the driver's application of the brake pedal. The Brake Pedal Position Sensor provides an analog voltage signal that will increase as the brake pedal is applied. The Brake Pedal Position Sensor contains 2 potentiometer-type brake pedal position sensors. When the pedal is pressed, the voltage of one sensor goes up and the voltage of the other sensor goes down. The Diagnostic Trouble Code (DTC) will be set when the Brake Pedal Position Sensor signal is noisy or erratic.
OBDII Code P057E 2016 GMC Sierra - Brake Pedal Position Sensor Circuit Erratic - AutoCodes.com
P057E 2016 GMC Sierra Code - Brake Pedal Position Sensor Circuit Erratic

What are the Possible Causes of the DTC P057E 2016 GMC Sierra?

  • Brake Pedal Position Sensor Calibration
  • Faulty Brake Pedal Position Sensor
  • Brake Pedal Position Sensor harness is open or shorted
  • Brake Pedal Position Sensor circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P057E 2016 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P057E 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P057E 2016 GMC Sierra code?

Need more information on how to fix the P057E 2016 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P057E 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P057E 2016 GMC Sierra Code

What does the OBDII code P057E mean for a 2016 GMC Sierra?

P057E indicates an erratic signal from the brake pedal position sensor circuit, which monitors the position of the brake pedal.

What are common symptoms of the P057E code?

Symptoms may include the illumination of the check engine light, issues with cruise control functionality, or erratic braking behavior.

What causes the P057E code on a 2016 GMC Sierra?

Common causes include a faulty brake pedal position sensor, damaged wiring or connectors in the sensor circuit, or issues with the vehicle's ECM.

Can the P057E code affect driving safety?

Yes, it can impact cruise control and braking systems, potentially creating unsafe driving conditions.

How do you diagnose the P057E code?

Diagnosis typically involves scanning for the code, inspecting the brake pedal position sensor, checking wiring and connectors, and testing the sensor's signal output.

Can you drive your 2016 GMC Sierra with the P057E code?

Driving is possible but not recommended due to potential cruise control malfunctions and safety concerns with braking.

How can the P057E code be repaired?

Repairs may involve replacing the faulty brake pedal position sensor, repairing or replacing damaged wiring, or updating the vehicle's ECM software.

What tools are needed to fix the P057E code?

A diagnostic scanner, multimeter, and basic automotive tools are typically required for troubleshooting and repairs.

Does the P057E code require professional repair?

While experienced DIYers may handle the repairs, professional diagnosis and repair are recommended for safety and accuracy.

How much does it cost to fix the P057E code on a 2016 GMC Sierra?

Repair costs vary, but replacing a brake pedal position sensor typically costs between $150 and $300, including parts and labor.

Discuss the causes and fixes for P057E 2016 GMC Sierra OBDII Code

Code P057E 2016 GMC Sierra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play