AutoCodes – Chevrolet – P057D 2016 Chevrolet Silverado

P057D 2016 Chevrolet Silverado Code - Brake Pedal Position Sensor Circuit High Voltage

Quick Answer

The Brake Pedal Position (BPP) sensor is used to sense the action of the driver's application of the brake pedal. Common causes include Brake Pedal Position Sensor Calibration, Faulty Brake Pedal Position Sensor, Brake Pedal Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P057D 2016 Chevrolet Silverado indicates Brake Pedal Position Sensor Circuit High Voltage.
Common causes: Common causes include Brake Pedal Position Sensor Calibration, Faulty Brake Pedal Position Sensor, Brake Pedal Position Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 625

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 14, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P057D 2016 Chevrolet Silverado Description

The Brake Pedal Position (BPP) sensor is used to sense the action of the driver's application of the brake pedal. The Brake Pedal Position Sensor provides an analog voltage signal that will increase as the brake pedal is applied. The Brake Pedal Position Sensor contains 2 potentiometer-type brake pedal position sensors. When the pedal is pressed, the voltage of one sensor goes up and the voltage of the other sensor goes down. The Diagnostic Trouble Code (DTC) will be set when the Brake Pedal Position Sensor is greater than 4.75 V for greater than 1 s.

OBDII Code P057D 2016 Chevrolet Silverado - Brake Pedal Position Sensor Circuit High Voltage - AutoCodes.com — P057D 2016 Chevrolet Silverado Code - Brake Pedal Position Sensor Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P057D 2016 Chevrolet Silverado?

Brake Pedal Position Sensor Calibration
Faulty Brake Pedal Position Sensor
Brake Pedal Position Sensor harness is open or shorted
Brake Pedal Position Sensor circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P057D 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P057D 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P057D 2016 Chevrolet Silverado code?

Need more information on how to fix the P057D 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P057D 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.