P057C 2016 Chevrolet Silverado Code - Brake Pedal Position Sensor Circuit Low Voltage
Quick Answer
The Brake Pedal Position (BPP) sensor is used to sense the action of the driver's application of the brake pedal. Common causes include Brake Pedal Position Sensor Calibration, Faulty Brake Pedal Position Sensor, Brake Pedal Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P057C 2016 Chevrolet Silverado indicates Brake Pedal Position Sensor Circuit Low Voltage.
- Common causes
- Common causes include Brake Pedal Position Sensor Calibration, Faulty Brake Pedal Position Sensor, Brake Pedal Position Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P057C 2016 Chevrolet Silverado Description
What are the Possible Causes of the DTC P057C 2016 Chevrolet Silverado?
- Brake Pedal Position Sensor Calibration
- Faulty Brake Pedal Position Sensor
- Brake Pedal Position Sensor harness is open or shorted
- Brake Pedal Position Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P057C 2016 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P057C 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P057C 2016 Chevrolet Silverado code?
Need more information on how to fix the P057C 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P057C 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P057C 2016 Chevrolet Silverado Code
1. What does the OBDII code P057C mean on a 2016 Chevrolet Silverado?
The P057C code indicates a "Brake Pedal Position Sensor Circuit Low Voltage," meaning the brake pedal position sensor is reporting a lower voltage than expected.
2. What are the symptoms of code P057C in a 2016 Chevrolet Silverado?
Common symptoms include the brake lights not functioning properly, cruise control becoming inoperative, or an illuminated check engine light.
3. What causes the P057C code to appear?
The most common causes include a faulty brake pedal position sensor, damaged wiring or connectors in the sensor circuit, or a failure in the vehicle's electronic control module (ECM).
4. Can I drive my 2016 Chevrolet Silverado with the P057C code?
While the truck may still be drivable, issues like malfunctioning brake lights or cruise control could compromise safety. It’s best to address the problem promptly.
5. How do I diagnose the P057C code on my Silverado?
Start by inspecting the brake pedal position sensor and its wiring for damage or loose connections. Use a multimeter to check sensor voltage and continuity.
6. How is the P057C code fixed on a 2016 Chevrolet Silverado?
Repairs may include replacing the brake pedal position sensor, repairing damaged wiring, or cleaning and reconnecting corroded connectors.
7. How much does it cost to fix a P057C code?
Replacing a brake pedal position sensor typically costs between $100 and $300, including parts and labor. Wiring repairs may vary depending on the extent of the damage.
8. Can a dead battery cause the P057C code?
A weak or dead battery is unlikely to directly cause this code, but low system voltage can sometimes lead to false sensor readings.
9. Does the P057C code affect cruise control?
Yes, a faulty brake pedal position sensor can disable cruise control since the system relies on accurate sensor input for safe operation.
10. How can I prevent the P057C code from returning?
Regularly inspect the brake pedal position sensor and its wiring during routine maintenance to ensure they are clean, secure, and free of damage.
Discuss the causes and fixes for P057C 2016 Chevrolet Silverado OBDII Code
Code P057C 2016 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
