P057B 2014 GMC Sierra Code - Brake Pedal Position Sensor Performance
Quick Answer
The Brake Pedal Position (BPP) sensor is used to sense the action of the driver's application of the brake pedal. Common causes include Brake Pedal Position Sensor Calibration, Faulty Brake Pedal Position Sensor, Brake Pedal Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P057B 2014 GMC Sierra indicates Brake Pedal Position Sensor Performance.
- Common causes
- Common causes include Brake Pedal Position Sensor Calibration, Faulty Brake Pedal Position Sensor, Brake Pedal Position Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P057B 2014 GMC Sierra Description
What are the Possible Causes of the DTC P057B 2014 GMC Sierra?
- Brake Pedal Position Sensor Calibration
- Faulty Brake Pedal Position Sensor
- Brake Pedal Position Sensor harness is open or shorted
- Brake Pedal Position Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P057B 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P057B 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P057B 2014 GMC Sierra code?
Need more information on how to fix the P057B 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P057B 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P057B 2014 GMC Sierra Code
1. What does OBDII code P057B mean on a 2014 GMC Sierra?
P057B indicates a Brake Pedal Position Sensor Performance issue, meaning the sensor is not functioning within the expected parameters.
2. What are the symptoms of code P057B on a GMC Sierra?
Common symptoms include illumination of the check engine light, cruise control malfunction, or brake lights not operating correctly.
3. What causes code P057B on a 2014 GMC Sierra?
Possible causes include a faulty brake pedal position sensor, damaged wiring or connectors, or issues with the vehicle's powertrain control module (PCM).
4. Can I drive my GMC Sierra with code P057B?
While the vehicle may still be drivable, it’s not recommended as it could affect safety features like brake lights and cruise control functionality.
5. How do I fix code P057B on my 2014 GMC Sierra?
Repairs may involve replacing the brake pedal position sensor, repairing damaged wiring, or recalibrating the sensor using diagnostic tools.
6. How is the brake pedal position sensor tested for P057B?
A mechanic will use a scan tool to monitor the sensor's readings and check for irregularities, as well as inspect the wiring and connectors for damage.
7. Is code P057B related to the vehicle's cruise control system?
Yes, a faulty brake pedal position sensor can disable the cruise control system as it’s used to determine when the brakes are applied.
8. How much does it cost to fix code P057B on a GMC Sierra?
Repair costs vary but typically range from $150 to $300, depending on whether the sensor needs replacement or if wiring repairs are required.
9. Can a dead battery cause code P057B on a 2014 GMC Sierra?
A dead or weak battery is unlikely to directly cause this code, but voltage issues could indirectly affect sensor performance.
10. Does the brake pedal position sensor require calibration after replacement?
Yes, in many cases, the sensor needs to be calibrated using a scan tool to ensure proper operation after replacement.
Discuss the causes and fixes for P057B 2014 GMC Sierra OBDII Code
Code P057B 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
