AutoCodes – Chevrolet – P0573 Chevrolet

P0573 Chevrolet Code - Brake Switch Circuit High Voltage

Quick Answer

The Brake Pedal Position Sensor signal circuit is a B+ input from the Body Control Module (BCM) to the Engine Control Module (ECM). Common causes include Faulty Brake Pedal Position Sensor, Misadjusted Brake Pedal Position Sensor, Brake Pedal Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0573 Chevrolet indicates Brake Switch Circuit High Voltage.
Common causes: Common causes include Faulty Brake Pedal Position Sensor, Misadjusted Brake Pedal Position Sensor, Brake Pedal Position Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 18,977

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 14, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0573 Chevrolet Description

The Brake Pedal Position Sensor signal circuit is a B+ input from the Body Control Module (BCM) to the Engine Control Module (ECM). The BCM and ECM monitor the Brake Pedal Position Sensor signal circuit to detect when the brake pedal has been applied. When the brake pedal is applied, the BCM supplies B+ on the stop lamp signal circuit and also sends a serial data message to the ECM indicating that the brake pedal has been applied. This Diagnostic Trouble Code (DTC) will be set when the ECM detects a short to voltage on the discrete brake signal circuit when the serial data message from the BCM indicates the brakes are not applied. This diagnostic will run when the serial data message and the voltage signal on the brake switch signal circuit do not match for 8 out 10 times, and the condition is present for greater than 2 s.

OBDII Code P0573 Chevrolet - Brake Switch Circuit High Voltage - AutoCodes.com — P0573 Chevrolet Code - Brake Switch Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P0573 Chevrolet?

Faulty Brake Pedal Position Sensor
Misadjusted Brake Pedal Position Sensor
Brake Pedal Position Sensor harness is open or shorted
Brake Pedal Position Sensor circuit poor electrical connection
Faulty Body Control Module (BCM)

How to Fix the DTC P0573 Chevrolet?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0573 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0573 Chevrolet code?

Need more information on how to fix the P0573 Chevrolet code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0573 Chevrolet code diagnosed by a professional: Find a repair shop in your area

Information for Specific Chevrolet Models

P0573 2014 Chevrolet Silverado — Brake Switch Circuit High Voltage
P0573 2015 Chevrolet Silverado — Brake Switch Circuit High Voltage
P0573 2016 Chevrolet Silverado — Brake Switch Circuit High Voltage
P0573 2017 Chevrolet Silverado — Brake Switch Circuit High Voltage
P0573 2018 Chevrolet Silverado — Brake Switch Circuit High Voltage

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0573 Chevrolet Code

No Frequently Asked Questions about P0573 Chevrolet Code found.

Discuss the causes and fixes for P0573 Chevrolet OBDII Code

Submit a New Comment

Anthony
Date: April 26, 2018 at 8:16 pm

I have a 2011 Silverado and the cruise control does not work, PO573 code is coming up... what can I do to fix it??

Reply to Comment
OBDIITech
Date: April 27, 2018 at 1:29 am

The problem is the Brake Light Switch. Replacing the switch usually takes care of the problem.

Reply to Comment
Kevin Araujo
Date: May 26, 2018 at 3:12 pm

Could this also be why my 2007 Chevy suburban turn off when I brake?

Reply to Comment
OBDIITech
Date: May 26, 2018 at 6:03 pm

Very unlikely, a bad switch may trigger the code or cause the brake light to stop working, but I haven't seen turning off the engine.

Reply to Comment
Jamie Pomposelli
Date: March 22, 2019 at 10:59 am

I have the same problem 2011 Silverado cruise control does not work P0573. I change the brake control switch cruise control still does not work. What can I check now?
Thanks Jamie

Reply to Comment
OBDIITech
Date: March 22, 2019 at 3:12 pm

Unfortunately, other than the Brake Light Switch (Stop Lamp Switch) on the brake pedal, I have not seen any other component setting the P0573 code. Please double check the switch installation.
Do you have adjustable pedals?

Reply to Comment
Jamie Pomposelli
Date: March 22, 2019 at 9:07 pm

I have put two new switches in and neither one made a difference. My truck does have the adjustable pedals.and I have checked around already for frayed wires and I haven't seen any evidence of that.
Thanks again
Jamie

Reply to Comment