P0562 Dodge Code - System Low Voltage - Hybrid
Quick Answer
The Motor Generator Unit (MGU) has the Hybrid Control Processor (HCP)built into the MGU. Common causes include 12 Volt Battery Low, Battery Pack Control Module (BPCM) DTCs, B+ feed. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0562 Dodge indicates System Low Voltage - Hybrid.
- Common causes
- Common causes include 12 Volt Battery Low, Battery Pack Control Module (BPCM) DTCs, B+ feed.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0562 Dodge Description
The Battery Pack Control Module (BPCM) is contained within the 48 volt Power Pack Unit (PPU). The BPCM provides battery management and system functionality in conjunction with Cell Supervision Circuits (CSCs) that monitor and balance the battery cells as well as the monitoring of related external support systems. The CSCs are also located within the Battery Pack. The BPCM communicates with the vehicle via CAN-C bus. The main functions of the BPCM are to manage battery voltage and maintain the 12 volt battery system using battery pack current, voltage and temperature sensing capabilities. CAN communication is used to monitor other vehicle systems and for fault detection reporting. Diagnosing any DTC related to the BPCM should start with verifying that all fuses, wiring and connections critical to proper system operations are in good repair, securely installed and connected.
The Diagnostic Trouble Code (DTC) will be set when the Hybrid Control Processor detects that the battery voltage is below 8.5 volts.
What are the Possible Causes of the DTC P0562 Dodge?
- 12 Volt Battery Low
- Battery Pack Control Module (BPCM) DTCs
- B+ feed
- Switched ignition feed
- Ground circuit
- Faulty Motor Generator Unit (MGU)
How to Fix the DTC P0562 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0562 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0562 Dodge code?
Need more information on how to fix the P0562 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0562 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0562 Dodge Code
1. What does the OBDII code P0562 mean on a Dodge vehicle?
P0562 indicates "System Low Voltage," meaning the vehicle's electrical system voltage has dropped below the required level for proper operation, which can affect hybrid components.
2. What are common symptoms of the P0562 code on a Dodge hybrid?
Symptoms may include dim or flickering lights, difficulty starting the engine, reduced performance of hybrid systems, and warning lights on the dashboard.
3. What causes the P0562 code in Dodge hybrid vehicles?
Common causes include a weak or failing battery, alternator issues, loose or corroded battery cables, or problems with the hybrid electrical system.
4. Can a bad alternator trigger the P0562 code?
Yes, a malfunctioning alternator can cause low voltage in the electrical system, leading to the P0562 code.
5. How do I diagnose the P0562 code on my Dodge hybrid?
Start by checking the battery voltage, inspecting the alternator, and ensuring all battery cables and connections are clean and secure. Use a multimeter to test voltage levels.
6. Can driving with the P0562 code damage my Dodge hybrid?
Yes, prolonged driving with low system voltage can harm electrical components and hybrid systems, potentially causing more expensive repairs.
7. How do I fix the P0562 code on a Dodge hybrid?
Repairs may include replacing the battery or alternator, cleaning or tightening battery connections, or addressing specific issues in the hybrid electrical system.
8. Will clearing the P0562 code solve the problem?
Clearing the code without fixing the underlying issue will not resolve the problem. The code will likely return if low voltage persists.
9. How much does it cost to repair the P0562 code on a Dodge hybrid?
Costs vary depending on the issue. Battery replacement can cost $100–$300, while alternator repairs may range from $300–$700. Hybrid system repairs may be more expensive.
10. Can a failing hybrid battery cause the P0562 code?
Yes, a failing hybrid battery can lead to insufficient voltage in the system, triggering the P0562 code.
Discuss the causes and fixes for P0562 Dodge OBDII Code
Code P0562 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
