P0562 Chrysler Code - System Low Voltage - Hybrid
Quick Answer
The Motor Generator Unit (MGU) has the Hybrid Control Processor (HCP)built into the MGU. Common causes include 12 Volt Battery Low, Battery Pack Control Module (BPCM) DTCs, B+ feed. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0562 Chrysler indicates System Low Voltage - Hybrid.
- Common causes
- Common causes include 12 Volt Battery Low, Battery Pack Control Module (BPCM) DTCs, B+ feed.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0562 Chrysler Description
The Battery Pack Control Module (BPCM) is contained within the 48 volt Power Pack Unit (PPU). The BPCM provides battery management and system functionality in conjunction with Cell Supervision Circuits (CSCs) that monitor and balance the battery cells as well as the monitoring of related external support systems. The CSCs are also located within the Battery Pack. The BPCM communicates with the vehicle via CAN-C bus. The main functions of the BPCM are to manage battery voltage and maintain the 12 volt battery system using battery pack current, voltage and temperature sensing capabilities. CAN communication is used to monitor other vehicle systems and for fault detection reporting. Diagnosing any DTC related to the BPCM should start with verifying that all fuses, wiring and connections critical to proper system operations are in good repair, securely installed and connected.
The Diagnostic Trouble Code (DTC) will be set when the Hybrid Control Processor detects that the battery voltage is below 8.5 volts.
What are the Possible Causes of the DTC P0562 Chrysler?
- 12 Volt Battery Low
- Battery Pack Control Module (BPCM) DTCs
- B+ feed
- Switched ignition feed
- Ground circuit
- Faulty Motor Generator Unit (MGU)
How to Fix the DTC P0562 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0562 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0562 Chrysler code?
Need more information on how to fix the P0562 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0562 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0562 Chrysler Code
1. What does the OBDII code P0562 mean on a Chrysler hybrid vehicle?
P0562 indicates "System Low Voltage," meaning the electrical system voltage has dropped below the required threshold for proper operation.
2. What are the common symptoms of code P0562 in a Chrysler hybrid?
Symptoms may include dim or flickering headlights, difficulty starting the vehicle, stalling, weak accessory performance, and the illumination of the check engine light.
3. What causes code P0562 to trigger in a Chrysler hybrid vehicle?
Common causes include a failing 12V battery, loose or corroded battery connections, a faulty alternator, or issues with the hybrid system's voltage monitoring.
4. Can a bad alternator cause the P0562 code in a Chrysler hybrid?
Yes, a failing alternator can cause low voltage, leading to the P0562 code being triggered.
5. How is the P0562 code diagnosed in a Chrysler hybrid?
Technicians typically check the battery voltage, inspect the alternator output, and examine battery terminals and wiring for damage or corrosion.
6. Can driving with a P0562 code damage my Chrysler hybrid?
Yes, driving with low voltage can strain electrical components, potentially causing further damage to the vehicle's systems.
7. How can I fix the P0562 code on my Chrysler hybrid?
Repairs may include replacing a failing battery, repairing loose or corroded connections, or replacing a faulty alternator or voltage regulator.
8. Is the P0562 code specific to hybrid Chrysler vehicles?
No, P0562 can occur in both hybrid and non-hybrid Chrysler vehicles, but the diagnostic process may differ slightly for hybrids.
9. Can a hybrid system fault cause the P0562 code in a Chrysler?
Yes, issues within the hybrid system, such as a faulty DC-DC converter, can result in low voltage and trigger the P0562 code.
10. How much does it cost to repair a P0562 code on a Chrysler hybrid?
Repair costs vary depending on the cause but typically range from $100 for battery terminal cleaning to $500 or more for alternator replacement.
Discuss the causes and fixes for P0562 Chrysler OBDII Code
Code P0562 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
