AutoCodes – Ford – P0562 2010 Ford Fusion

P0562 2010 Ford Fusion Code - System Voltage Low

Quick Answer

With the engine running, the charging system warning indicator is off. Common causes include Low battery charge, Battery defective, Loose or missing alternator drive belt. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0562 2010 Ford Fusion indicates System Voltage Low.
Common causes: Common causes include Low battery charge, Battery defective, Loose or missing alternator drive belt.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,631

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 12, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0562 2010 Ford Fusion Description

With the engine running, the charging system warning indicator is off. The sense circuit to the generator field coil is 13-15 volts. This voltage feedback is used by the regulator to maintain the battery voltage at the desired set point. The Stator circuit (internal to the generator) is used to monitor generator operation. This circuit and other regulator internal conditions are checked by the regulator to allow the Powertrain Control Module (PCM) to turn off the charging system warning indicator by sending a message over the controller area network (CAN) bus to the instrument cluster (IC). The positive battery output (B+) circuit is the generator output voltage supplied to the battery and electrical system.
The System voltage is monitored by the PCM. This Diagnostic Trouble Code (DTC) is set when the Powertrain Control Module detects low system voltage.

OBDII Code P0562 2010 Ford Fusion - System Voltage Low - AutoCodes.com — P0562 2010 Ford Fusion Code - System Voltage Low

What does this mean?

What are the Possible Causes of the DTC P0562 2010 Ford Fusion?

Low battery charge
Battery defective
Loose or missing alternator drive belt
Faulty alternator
Open or short system voltage circuit

How to Fix the DTC P0562 2010 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Start by checking for loose or corroded battery terminals. If the terminals are OK, the next step is to recharge or replace the battery.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0562 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0562 2010 Ford Fusion code?

Need more information on how to fix the P0562 2010 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0562 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0562 2010 Ford Fusion Code

1. What does the OBDII code P0562 mean in a 2010 Ford Fusion?

P0562 indicates "System Voltage Low," meaning the vehicle's electrical system is not maintaining the proper voltage, typically below 10.5 volts.

2. What are the common symptoms of code P0562 in a 2010 Ford Fusion?

Symptoms may include dim headlights, battery warning light, difficulty starting the vehicle, stalling, or malfunctioning electrical components.

3. What causes the P0562 code in a 2010 Ford Fusion?

Common causes include a failing alternator, bad battery, corroded or loose battery connections, damaged wiring, or a faulty voltage regulator.

4. Can a weak battery trigger the P0562 code?

Yes, a weak or failing battery can cause low system voltage and trigger the P0562 code.

5. How do I diagnose the P0562 code on my 2010 Ford Fusion?

Start by checking the battery voltage with a multimeter, inspect battery terminals and wiring for corrosion or damage, and test the alternator's output.

6. Can a bad alternator cause the P0562 code in a 2010 Ford Fusion?

Yes, a bad alternator that fails to charge the battery properly can cause low system voltage and trigger the P0562 code.

7. How do I fix the P0562 code on a 2010 Ford Fusion?

Possible fixes include replacing the alternator, battery, or voltage regulator, cleaning corroded terminals, repairing damaged wiring, or tightening loose connections.

8. Is it safe to drive a 2010 Ford Fusion with the P0562 code?

Driving with the P0562 code is not recommended, as the vehicle may stall or lose power, potentially leaving you stranded.

9. How much does it cost to repair the P0562 code on a 2010 Ford Fusion?

Costs can vary, but replacing an alternator may range from $400 to $800, while a new battery typically costs $100 to $300. Minor fixes like cleaning terminals are less expensive.

10. Can P0562 cause long-term damage if not addressed?

Yes, ignoring the P0562 code can lead to further electrical system damage, drained battery, or even failure of critical components like the fuel pump or ignition system.