AutoCodes - Toyota - P0560 2010 TOYOTA CAMRY

P0560 2010 TOYOTA CAMRY Code - System Voltage Malfunction

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3
Table of contents

|P0560 2010 TOYOTA CAMRY code possible causes

  • Low battery charge
  • Battery defective
  • EFI No. 1 fuse
  • Loose or missing alternator drive belt
  • Faulty alternator
  • Open or short system voltage circuit

|How do I fix the P0560 2010 TOYOTA CAMRY code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|P0560 2010 TOYOTA CAMRY code tech notes

Start by checking the battery terminals (also the fusible link) for corrosion or loose connection, then EFI No. 1 fuse then check charging system is battery is not holding charge replace the battery.

|Cost of diagnosing the P0560 2010 TOYOTA CAMRY code

Labor: 1.0

The cost of diagnosing the P0560 2010 TOYOTA CAMRY code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|When is the P0560 2010 TOYOTA CAMRY code detected?

The P0560 code is detected when the Engine Control Module (ECM) voltage out of range.

|What are P0560 2010 TOYOTA CAMRY code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Slow engine start
  • Low battery power

|P0560 2010 TOYOTA CAMRY code description

The battery supplies electricity to the Engine Control Module (ECM) even when the ignition switch is OFF. This electricity allows the ECM to store data such as Diagnostic Trouble Code (DTC) history, freeze frame data, fuel trim values and other data. If the battery voltage falls below a minimum level, the ECM will conclude that there is a fault in the power supply circuit. The next time the engine starts, the ECM will turn on the Malfunction Indicator Light (MIL) and a DTC will be set.
OBDII Code P0560 2010 Toyota Camry - System Voltage Malfunction -

|Need more information with the P0560 2010 TOYOTA CAMRY code?

Need more information on how to fix the P0560 2010 TOYOTA CAMRY code? Get Access to Factory Service Manuals

|Need help with a P0560 2010 TOYOTA CAMRY code?

Get the P0560 2010 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

|P0560 2010 TOYOTA CAMRY code comments

Help us improve Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0560 2010 Toyota Camry code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 3
1=Easy 2=Moderate 3=Hard What is this?