P0552 2011 Ford Fusion Code - Power Steering Pressure Sensor Circuit Low Input
Quick Answer
Power steering pressure (PSP) sensor is installed to the power steering high-pressure tube and detects a power steering load. Common causes include Faulty Power Steering Pressure Sensor, Power Steering Pressure Sensor harness is open or shorted, Power Steering Pressure Sensor circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0552 2011 Ford Fusion indicates Power Steering Pressure Sensor Circuit Low Input.
- Common causes
- Common causes include Faulty Power Steering Pressure Sensor, Power Steering Pressure Sensor harness is open or shorted, Power Steering Pressure Sensor circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0552 2011 Ford Fusion Description
What are the Possible Causes of the DTC P0552 2011 Ford Fusion?
- Faulty Power Steering Pressure Sensor
- Power Steering Pressure Sensor harness is open or shorted
- Power Steering Pressure Sensor circuit poor electrical connection
How to Fix the DTC P0552 2011 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0552 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0552 2011 Ford Fusion code?
Need more information on how to fix the P0552 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0552 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0552 2011 Ford Fusion Code
1. What are the common symptoms of OBDII code P0552 in a 2011 Ford Fusion?
The common symptoms of OBDII code P0552 in a 2011 Ford Fusion include difficulty turning the steering wheel, stiff or jerky steering, and the power steering warning light illuminated on the dashboard.
2. What can cause the Power Steering Pressure Sensor Circuit Low Input code (P0552) in a 2011 Ford Fusion?
The P0552 code in a 2011 Ford Fusion can be caused by issues such as a faulty power steering pressure sensor, damaged wiring or connectors in the power steering system, or low power steering fluid levels.
3. How can I diagnose the Power Steering Pressure Sensor Circuit Low Input code (P0552) in my 2011 Ford Fusion?
Diagnosing the P0552 code in a 2011 Ford Fusion involves using an OBDII scanner to retrieve the code, checking the power steering system for leaks, inspecting the wiring and connectors for damage, and testing the power steering pressure sensor for proper function.
4. Can driving with the OBDII code P0552 in a 2011 Ford Fusion cause further damage?
Continuing to drive with the P0552 code in a 2011 Ford Fusion can potentially lead to further damage to the power steering system, affecting the vehicle's steering performance and safety. It is recommended to address the issue promptly.
5. How can I reset the OBDII code P0552 in my 2011 Ford Fusion after making repairs?
After repairing the underlying issue causing the P0552 code in a 2011 Ford Fusion, you can reset the code using an OBDII scanner or by disconnecting the car's battery for a few minutes to clear the fault code.
6. Are there any DIY repair tips for fixing the Power Steering Pressure Sensor Circuit Low Input code (P0552) in a 2011 Ford Fusion?
DIY repair tips for addressing the P0552 code in a 2011 Ford Fusion include checking and topping up power steering fluid levels, inspecting wiring for damage, and cleaning or replacing the power steering pressure sensor if necessary.
7. How much does it typically cost to repair the OBDII code P0552 in a 2011 Ford Fusion?
The cost of repairing the P0552 code in a 2011 Ford Fusion can vary depending on the underlying cause. It may range from around $100 to $300 for parts and labor, but prices can differ based on the specific repairs needed.
8. Can I drive my 2011 Ford Fusion with the Power Steering Pressure Sensor Circuit Low Input code (P0552) temporarily?
While it may be possible to drive your 2011 Ford Fusion with the P0552 code temporarily, it is not recommended as it can lead to steering issues and potential safety hazards. It is best to address the problem promptly.
9. What are the long-term effects of ignoring the OBDII code P0552 in a 2011 Ford Fusion?
Ignoring the P0552 code in a 2011 Ford Fusion can result in ongoing power steering problems, increased wear on steering components, and potential safety risks due to compromised steering control.
10. Is it necessary to visit a mechanic for repairing the Power Steering Pressure Sensor Circuit Low Input code (P0552) in a 2011 Ford Fusion?
While some DIY enthusiasts may be able to address the P0552 code in a 2011 Ford Fusion on their own, it is generally recommended to consult a qualified mechanic for accurate diagnosis and professional repairs to ensure the issue is properly resolved.
Discuss the causes and fixes for P0552 2011 Ford Fusion OBDII Code
Code P0552 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
