P0551 Jeep Code - Power Steering Pressure Sensor Circuit Range/Performance
Quick Answer
Power steering pressure (PSP) sensor is installed to the power steering high-pressure tube and detects a power steering load. Common causes include Faulty Power Steering Pressure Sensor, Power Steering Pressure Sensor harness is open or shorted, Power Steering Pressure Sensor circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0551 Jeep indicates Power Steering Pressure Sensor Circuit Range/Performance.
- Common causes
- Common causes include Faulty Power Steering Pressure Sensor, Power Steering Pressure Sensor harness is open or shorted, Power Steering Pressure Sensor circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0551 Jeep Description
What are the Possible Causes of the DTC P0551 Jeep?
- Faulty Power Steering Pressure Sensor
- Power Steering Pressure Sensor harness is open or shorted
- Power Steering Pressure Sensor circuit poor electrical connection
How to Fix the DTC P0551 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0551 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0551 Jeep code?
Need more information on how to fix the P0551 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0551 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0551 Jeep Code
1. What does the OBDII code P0551 mean on a Jeep?
The P0551 code indicates a problem with the Power Steering Pressure Sensor Circuit, specifically that its readings are out of the expected range or performance parameters.
2. What are the common symptoms of the P0551 code in a Jeep?
Symptoms may include a check engine light, hard steering at low speeds, inconsistent power steering assistance, or idle fluctuations when turning the steering wheel.
3. What causes the P0551 code on a Jeep?
Common causes include a faulty power steering pressure sensor, damaged wiring or connectors in the sensor circuit, low power steering fluid levels, or a failing power steering pump.
4. Can I drive my Jeep with the P0551 code?
While you may still be able to drive, it’s not recommended because steering problems could worsen and affect vehicle safety.
5. How do I diagnose the P0551 code on a Jeep?
Start by checking the power steering fluid level, inspecting the sensor and its wiring for damage, and using a scan tool to monitor sensor data for irregularities.
6. How can I fix the P0551 code on my Jeep?
Repairs may include replacing the power steering pressure sensor, repairing damaged wiring or connectors, refilling or flushing power steering fluid, or replacing the power steering pump if necessary.
7. Where is the power steering pressure sensor located on a Jeep?
The power steering pressure sensor is typically located on or near the power steering pump or high-pressure line.
8. How much does it cost to repair the P0551 code on a Jeep?
Repair costs can range from $50 to $250, depending on whether the issue is with the sensor, wiring, or another component of the power steering system.
9. Can low power steering fluid cause the P0551 code?
Yes, low or contaminated power steering fluid can affect sensor readings and trigger the P0551 code.
10. Do I need to reset the code after fixing the issue?
Yes, after completing the repair, use an OBDII scanner to clear the code and verify that it doesn’t return during a test drive.
Discuss the causes and fixes for P0551 Jeep OBDII Code
Code P0551 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
