AutoCodes – Nissan – P052C Nissan

P052C Nissan Code - Cold Start 'A' Camshaft Position Timing Over-Advanced Bank 2

Quick Answer

The Engine Control Module (ECM) monitors the Camshaft Position Timing. Common causes include Faulty Crankshaft position sensor, Faulty Camshaft position sensor, Faulty Intake valve timing control solenoid valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P052C Nissan indicates Cold Start 'A' Camshaft Position Timing Over-Advanced Bank 2.
Common causes: Common causes include Faulty Crankshaft position sensor, Faulty Camshaft position sensor, Faulty Intake valve timing control solenoid valve.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,225

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 13, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P052C Nissan Description

The Engine Control Module (ECM) monitors the Camshaft Position Timing. The Diagnostic Trouble Code (DTC) will set when there is a gap between the angle of target and phase-control angle degree when the engine is in a cold condition.

OBDII Code P052C Nissan - Cold Start 'A' Camshaft Position Timing Over-Advanced Bank 2 - AutoCodes.com — P052C Nissan Code - Cold Start 'A' Camshaft Position Timing Over-Advanced Bank 2

What does this mean?

What are the Possible Causes of the DTC P052C Nissan?

Faulty Crankshaft position sensor
Faulty Camshaft position sensor
Faulty Intake valve timing control solenoid valve
Faulty Intake valve timing intermediate lock control solenoid valve
Accumulation of debris to the signal pick-up portion of the camshaft
Incorrect timing chain installation
Foreign matter caught in the oil groove for intake valve timing control

How to Fix the DTC P052C Nissan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P052C Nissan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P052C Nissan code?

Need more information on how to fix the P052C Nissan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P052C Nissan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P052C Nissan Code

1. What are the common symptoms of OBDII code P052C in a Nissan?

- Common symptoms include rough idle, decreased engine performance, engine misfires, and illuminated check engine light.

2. What does the OBDII code P052C on a Nissan mean?

- The code indicates that the camshaft position timing for bank 2 is over-advanced during cold start conditions.

3. What are the possible causes of OBDII code P052C in a Nissan?

- Possible causes include a faulty camshaft position sensor, issues with the camshaft phaser, timing chain problems, or engine oil issues.

4. How serious is the OBDII code P052C in a Nissan?

- While the code may not cause immediate harm, it can lead to poor engine performance and potentially more severe issues if left unaddressed.

5. Can I still drive my Nissan with the P052C code present?

- It is not recommended to drive the vehicle with the code present, as it can lead to further damage and decreased engine efficiency.

6. How is OBDII code P052C in a Nissan diagnosed?

- The code is diagnosed using an OBDII scanner to retrieve the fault code, followed by a comprehensive inspection of the camshaft position sensor and related components.

7. What are some repair tips for fixing OBDII code P052C in a Nissan?

- Repair tips include checking and replacing the camshaft position sensor, inspecting the camshaft phaser for proper operation, and ensuring proper engine oil levels and quality.

8. Can I reset the OBDII code P052C in a Nissan by disconnecting the battery?

- While disconnecting the battery may temporarily clear the code, it is not a recommended method as the underlying issue causing the code will persist.

9. Is it possible to prevent OBDII code P052C from occurring in my Nissan?

- Regular maintenance, including timely oil changes and inspections, can help prevent issues that may trigger the P052C code in a Nissan.

10. How much does it typically cost to repair OBDII code P052C in a Nissan?

- The cost of repair can vary depending on the specific cause of the code, but it may range from a few hundred to over a thousand dollars, including parts and labor.