AutoCodes – Generic – P0520

P0520 Code - Engine Oil Pressure Sensor/Switch Circuit Malfunction

Quick Answer

The PCM continuously monitors the engine oil pressure. Common causes include Low oil level or motor mechanical fault, Faulty Oil Pressure Sensor, Oil Pressure Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0520 indicates Engine Oil Pressure Sensor/Switch Circuit Malfunction.
Common causes
Common causes include Low oil level or motor mechanical fault, Faulty Oil Pressure Sensor, Oil Pressure Sensor harness is open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 55,388
How popular is this code, among other codes? Medium
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0520 Description

The PCM continuously monitors the engine oil pressure. The Oil Pressure Sensor/Switch sends a signal to the PCM when the engine is running.
OBDII Code P0520 - Engine Oil Pressure Sensor/Switch Circuit Malfunction - AutoCodes.com
P0520 Code - Engine Oil Pressure Sensor/Switch Circuit Malfunction

What are the Possible Causes of the DTC P0520?

  • Low oil level or motor mechanical fault
  • Faulty Oil Pressure Sensor
  • Oil Pressure Sensor harness is open or shorted
  • Oil Pressure Sensor circuit poor electrical connection

How to Fix the DTC P0520?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0520 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0520 code?

Need more information on how to fix the P0520 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0520 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0520 Code

1. What are the common symptoms of OBDII code P0520?

- Common symptoms of code P0520 include low oil pressure warning light on the dashboard, engine oil pressure gauge reading zero, engine performance issues, and potential engine stalling.

2. What can cause the OBDII code P0520 to trigger?

- The code P0520 is typically triggered by a malfunction in the engine oil pressure sensor or its circuit. This can be caused by a faulty sensor, wiring issues, or a problem with the oil pressure switch.

3. How serious is OBDII code P0520?

- Code P0520 should be taken seriously as it indicates a potential issue with the engine oil pressure sensor or circuit. Low oil pressure can lead to engine damage if not addressed promptly.

4. Can driving with OBDII code P0520 damage my engine?

- Driving with code P0520 can potentially damage your engine if the oil pressure is actually low and not just a sensor malfunction. It is recommended to address the issue as soon as possible.

5. How can I diagnose the cause of OBDII code P0520?

- Diagnosing code P0520 involves checking the engine oil level, inspecting the oil pressure sensor and wiring for damage, and testing the oil pressure switch. A professional diagnostic tool may also be needed.

6. What are some possible repair tips for OBDII code P0520?

- Repair tips for code P0520 may include replacing the engine oil pressure sensor, repairing damaged wiring, or replacing the oil pressure switch. It is also important to ensure the engine oil is at the correct level.

7. Can I reset OBDII code P0520 by disconnecting the battery?

- Disconnecting the battery may temporarily clear the code, but it is not a recommended method for resolving the underlying issue causing code P0520. It is best to diagnose and repair the problem properly.

8. Is it safe to drive my vehicle with OBDII code P0520 temporarily cleared?

- It is generally safe to drive with the code temporarily cleared, but it is important to address the root cause of the issue to prevent potential engine damage from low oil pressure.

9. How much does it typically cost to repair OBDII code P0520?

- The cost of repairing code P0520 can vary depending on the cause of the issue, the parts needed for repair, and labor costs. It is recommended to consult a mechanic for a more accurate estimate.

10. Can OBDII code P0520 be a false alarm?

- While rare, code P0520 can sometimes be triggered by a temporary glitch. It is advisable to reset the code and monitor the situation. If the code reappears, further diagnosis is necessary.

Discuss the causes and fixes for P0520 OBDII Code

  • engine starts runs 3 second then shuts off shows code P0520

  • What model and year is your vehicle?

  • Light came on a few days. after an oil change code read po520

  • Even if you just had the oil change done, start by inspecting the engine oil level. Have you seen any oil leaks? Do you know what engine oil weight was used?

  • Oil level looks good, no visible signs of leaking,,we aren't sure what oil they used but being a reputable company we assumed they knew it took synthetic oil

  • If the engine oil level and condition OK, then you may have to replace the Oil Pressure Sensor/Switch. What model and year is your vehicle?

  • yes that is what we thought..we have an appointment this week to get it fixed,,it is a common problem for this make...no more Chrysler products!

  • I just received this code. Replace the OPS no results. changed the oil with 5W-20 no results. Service engine light with P0520 code remains... Help. Thinking I need to attempt to trace the electrical wiring or take it into resolve.

  • What model and year is your vehicle? I may be able to get the wire diagram for you.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play