P050E 2013 Nissan Rogue Code - Cold Start Engine Exhaust Temperature Too Low
Quick Answer
The Engine Control Module (ECM) controls ignition timing and engine idle speed when engine is started with pre-warming up condition. Common causes include Lack of intake air volume, Faulty Fuel injection system, Faulty Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P050E 2013 Nissan Rogue indicates Cold Start Engine Exhaust Temperature Too Low.
- Common causes
- Common causes include Lack of intake air volume, Faulty Fuel injection system, Faulty Engine Control Module (ECM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P050E 2013 Nissan Rogue Description
What are the Possible Causes of the DTC P050E 2013 Nissan Rogue?
- Lack of intake air volume
- Faulty Fuel injection system
- Faulty Engine Control Module (ECM)
How to Fix the DTC P050E 2013 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P050E 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P050E 2013 Nissan Rogue code?
Need more information on how to fix the P050E 2013 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P050E 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P050E 2013 Nissan Rogue Code
1. What does the OBDII code P050E mean on a 2013 Nissan Rogue?
P050E indicates "Cold Start Engine Exhaust Temperature Too Low," meaning the exhaust temperature is not reaching the expected level during a cold start.
2. What are the common symptoms of code P050E in a 2013 Nissan Rogue?
Symptoms may include an illuminated check engine light, rough idling during cold starts, increased emissions, or reduced fuel efficiency.
3. What causes the P050E code to appear on a 2013 Nissan Rogue?
Common causes include a faulty coolant temperature sensor, malfunctioning EGR valve, exhaust leaks, or issues with the fuel mixture.
4. Can a dirty mass airflow sensor cause the P050E code?
Yes, a dirty or faulty mass airflow (MAF) sensor can lead to incorrect air-fuel mixture readings, which may contribute to this code.
5. How is the P050E code diagnosed on a 2013 Nissan Rogue?
A mechanic will use an OBDII scanner to confirm the code, inspect sensors related to temperature and emissions, and check for exhaust system leaks or blockages.
6. Can I drive my 2013 Nissan Rogue with the P050E code?
While it may still be drivable, prolonged driving with this code can lead to increased emissions, poor fuel economy, and potential damage to the catalytic converter.
7. How do you fix the P050E code on a 2013 Nissan Rogue?
Repairs may include replacing the coolant temperature sensor, cleaning or replacing the EGR valve, fixing exhaust leaks, or reprogramming the engine control module (ECM).
8. Does the P050E code indicate a problem with the catalytic converter?
Not directly, but if left unresolved, issues causing this code can lead to catalytic converter damage over time.
9. Can extreme cold weather trigger the P050E code?
Yes, extreme cold weather can make it harder for the exhaust temperature to reach expected levels, potentially triggering this code.
10. How much does it cost to repair the P050E code on a 2013 Nissan Rogue?
The cost depends on the root cause, ranging from $100 for a sensor replacement to over $1,000 for more complex repairs like exhaust system fixes.
Discuss the causes and fixes for P050E 2013 Nissan Rogue OBDII Code
Code P050E 2013 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
