AutoCodes – Nissan – P050E 2010 Nissan Rogue

P050E 2010 Nissan Rogue Code - Cold Start Engine Exhaust Temperature Too Low

Quick Answer

The Engine Control Module (ECM) controls ignition timing and engine idle speed when engine is started with pre-warming up condition. Common causes include Lack of intake air volume, Faulty Fuel injection system, Faulty Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P050E 2010 Nissan Rogue indicates Cold Start Engine Exhaust Temperature Too Low.
Common causes: Common causes include Lack of intake air volume, Faulty Fuel injection system, Faulty Engine Control Module (ECM).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,918

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 26, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P050E 2010 Nissan Rogue Description

The Engine Control Module (ECM) controls ignition timing and engine idle speed when engine is started with pre-warming up condition. This control promotes the activation of three way catalyst by heating the catalyst and reduces emissions.

OBDII Code P050E 2010 Nissan Rogue - Cold Start Engine Exhaust Temperature Too Low - AutoCodes.com — P050E 2010 Nissan Rogue Code - Cold Start Engine Exhaust Temperature Too Low

What does this mean?

What are the Possible Causes of the DTC P050E 2010 Nissan Rogue?

Lack of intake air volume
Faulty Fuel injection system
Faulty Engine Control Module (ECM)

How to Fix the DTC P050E 2010 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P050E 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P050E 2010 Nissan Rogue code?

Need more information on how to fix the P050E 2010 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P050E 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P050E 2010 Nissan Rogue Code

1. What are the common symptoms of OBDII code P050E in a 2010 Nissan Rogue?

- Common symptoms include hard starting in cold weather, rough idling, and a decrease in fuel efficiency.

2. What does the OBDII code P050E indicate in a 2010 Nissan Rogue?

- OBDII code P050E indicates that the cold start engine exhaust temperature is too low.

3. What are the possible causes of OBDII code P050E in a 2010 Nissan Rogue?

- Possible causes may include a faulty engine coolant temperature sensor, a malfunctioning thermostat, or issues with the engine control module.

4. How can I diagnose the issue related to OBDII code P050E in my 2010 Nissan Rogue?

- To diagnose the issue, you may need to use a diagnostic scanner to read the code and perform tests on the engine coolant temperature sensor and thermostat.

5. Is it safe to continue driving with OBDII code P050E in a 2010 Nissan Rogue?

- It is generally not recommended to continue driving with this code as it can lead to poor engine performance and potential damage if left unresolved.

6. How can I repair OBDII code P050E in my 2010 Nissan Rogue?

- Repairing the issue may involve replacing the faulty engine coolant temperature sensor, fixing the thermostat, or addressing any issues with the engine control module.

7. Can I reset the OBDII code P050E in my 2010 Nissan Rogue by disconnecting the battery?

- While disconnecting the battery may reset the code temporarily, it is essential to diagnose and fix the underlying issue to prevent the code from reoccurring.

8. Will OBDII code P050E cause my 2010 Nissan Rogue to fail an emissions test?

- Yes, OBDII code P050E can cause your vehicle to fail an emissions test due to the impact on engine performance and exhaust emissions.

9. How long does it typically take to repair OBDII code P050E in a 2010 Nissan Rogue?

- The repair time can vary depending on the exact cause of the issue, but it may take a few hours to a full day to diagnose and fix the problem.

10. Can a DIY enthusiast repair OBDII code P050E in a 2010 Nissan Rogue, or is it best left to professionals?

- While some aspects of the repair may be DIY-friendly, diagnosing and repairing OBDII code P050E may require specialized tools and knowledge, so it is often best left to automotive professionals.