AutoCodes – Nissan – P050E 2008 Nissan Rogue

P050E 2008 Nissan Rogue Code - Cold Start Engine Exhaust Temperature Too Low

Quick Answer

The Engine Control Module (ECM) controls ignition timing and engine idle speed when engine is started with pre-warming up condition. Common causes include Lack of intake air volume, Faulty Fuel injection system, Faulty Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P050E 2008 Nissan Rogue indicates Cold Start Engine Exhaust Temperature Too Low.
Common causes: Common causes include Lack of intake air volume, Faulty Fuel injection system, Faulty Engine Control Module (ECM).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,883

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 26, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P050E 2008 Nissan Rogue Description

The Engine Control Module (ECM) controls ignition timing and engine idle speed when engine is started with pre-warming up condition. This control promotes the activation of three way catalyst by heating the catalyst and reduces emissions.

OBDII Code P050E 2008 Nissan Rogue - Cold Start Engine Exhaust Temperature Too Low - AutoCodes.com — P050E 2008 Nissan Rogue Code - Cold Start Engine Exhaust Temperature Too Low

What does this mean?

What are the Possible Causes of the DTC P050E 2008 Nissan Rogue?

Lack of intake air volume
Faulty Fuel injection system
Faulty Engine Control Module (ECM)

How to Fix the DTC P050E 2008 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P050E 2008 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P050E 2008 Nissan Rogue code?

Need more information on how to fix the P050E 2008 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P050E 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P050E 2008 Nissan Rogue Code

1. What are the common symptoms of OBDII code P050E in a 2008 Nissan Rogue?

The common symptoms include rough idling, poor engine performance, and potentially decreased fuel efficiency.

2. What does the OBDII code P050E indicate in a 2008 Nissan Rogue?

The code P050E indicates that the engine exhaust temperature during cold start is too low, which can affect the engine's performance.

3. What are the possible causes of OBDII code P050E in a 2008 Nissan Rogue?

Possible causes include a faulty engine coolant temperature sensor, issues with the exhaust system, or a malfunctioning thermostat.

4. How can I diagnose the OBDII code P050E in my 2008 Nissan Rogue?

Diagnosing the code may involve checking the engine coolant temperature sensor, inspecting the exhaust system for leaks or blockages, and verifying the thermostat's operation.

5. How can I repair OBDII code P050E in my 2008 Nissan Rogue?

Repairing the issue may involve replacing the engine coolant temperature sensor, addressing any exhaust system problems, or replacing a faulty thermostat.

6. Can driving with the OBDII code P050E in a 2008 Nissan Rogue cause further damage?

Continuing to drive with the code may lead to reduced engine efficiency and potential long-term damage if the underlying issue is not addressed promptly.

7. How urgent is it to address OBDII code P050E in a 2008 Nissan Rogue?

It is advisable to address the issue promptly to prevent further engine performance issues and potential damage to components affected by the low engine exhaust temperature.

8. Will resetting the OBDII code P050E in a 2008 Nissan Rogue make it go away permanently?

Resetting the code may temporarily remove the warning light, but if the underlying issue is not fixed, the code is likely to reappear after the system detects the problem again.

9. Can I fix OBDII code P050E in my 2008 Nissan Rogue myself, or should I seek professional help?

Depending on your automotive knowledge and skills, you may be able to address simpler causes like a faulty sensor. For more complex issues, it's recommended to seek assistance from a professional.

10. How can I prevent OBDII code P050E from occurring in my 2008 Nissan Rogue in the future?

Regular maintenance, such as checking and replacing engine sensors as needed, ensuring proper exhaust system function, and following recommended service schedules, can help prevent the code from reoccurring.