P0507 Mercury Code - Idle Air Control System RPM Higher Than Expected
Quick Answer
The Powertrain Control Module (PCM) controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the Electronic Throttle Actuator Control (TAC). Common causes include Intake air restriction, Vacuum leaks, Dirty Throttle Body. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0507 Mercury indicates Idle Air Control System RPM Higher Than Expected.
- Common causes
- Common causes include Intake air restriction, Vacuum leaks, Dirty Throttle Body.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0507 Mercury Description
The PCM controls the Electronic Throttle Actuator Control so that the engine speed coincides with the target value memorized in the PCM. The target engine speed is the lowest speed at which the engine can operate steadily. The optimum value stored in the PCM is determined by taking into consideration various engine conditions, such as during warming up, deceleration, and engine load (air conditioner, power steering, and cooling fan operation, etc.).
The Diagnostic Trouble Code (DTC) will set the idle speed is more than the target idle speed by 200 rpm or more.
What are the Possible Causes of the DTC P0507 Mercury?
- Intake air restriction
- Vacuum leaks
- Dirty Throttle Body
- Faulty Electronic Throttle Actuator Control (TAC)
- Electronic Throttle Actuator Control harness is open or shorted
- Electronic Throttle Actuator Control circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0507 Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0507 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0507 Mercury code?
Need more information on how to fix the P0507 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0507 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0507 Mercury Code
1. What does the OBDII code P0507 mean on a Mercury vehicle?
P0507 indicates that the engine control module (ECM) has detected the idle speed is higher than the manufacturer’s specified range, suggesting an issue with the idle air control system.
2. What are the common symptoms of code P0507 on a Mercury?
Symptoms include a high or fluctuating idle speed, rough idling, potential stalling, reduced fuel efficiency, and the check engine light illuminating.
3. What causes code P0507 to appear on a Mercury vehicle?
Common causes include a dirty or faulty idle air control (IAC) valve, vacuum leaks, a dirty throttle body, or issues with the intake manifold gasket.
4. Can a vacuum leak trigger the P0507 code?
Yes, vacuum leaks can cause the ECM to detect higher-than-expected idle RPM and trigger the P0507 code.
5. How do you diagnose the P0507 code on a Mercury?
To diagnose, inspect the idle air control valve, check for vacuum leaks, clean the throttle body, and use a scan tool to monitor idle RPM and related sensor data.
6. How can you fix the P0507 code on a Mercury vehicle?
Repairs may involve cleaning or replacing the idle air control valve, repairing vacuum leaks, cleaning the throttle body, or replacing the intake manifold gasket if damaged.
7. Can a dirty throttle body cause code P0507 on a Mercury?
Yes, a dirty throttle body can disrupt airflow, causing the idle RPM to rise and triggering the P0507 code.
8. Is it safe to drive with the P0507 code on a Mercury?
While it may be safe to drive short distances, prolonged driving with this issue can lead to poor engine performance, reduced fuel economy, and potential engine damage if not addressed.
9. How much does it cost to fix the P0507 code on a Mercury?
The repair cost can vary, ranging from $50 for a throttle body cleaning to $300 or more for replacing parts like the idle air control valve or intake manifold gasket.
10. Can a faulty idle air control valve alone cause the P0507 code?
Yes, a malfunctioning or stuck idle air control valve can directly cause the engine to idle at higher RPMs, triggering the code.
Discuss the causes and fixes for P0507 Mercury OBDII Code
Code P0507 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
