AutoCodes – GMC – P0507 2014 GMC Sierra

P0507 2014 GMC Sierra Code - Idle Speed High

Quick Answer

The Engine Control Module (ECM) is the control center for the Throttle Actuator Control (TAC) system. Common causes include Dirty Throttle Body, Intake air leak, Throttle Body misadjusted or damaged. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0507 2014 GMC Sierra indicates Idle Speed High.
Common causes: Common causes include Dirty Throttle Body, Intake air leak, Throttle Body misadjusted or damaged.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 496

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 29, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0507 2014 GMC Sierra Description

The Engine Control Module (ECM) is the control center for the Throttle Actuator Control (TAC) system. The ECM determines the driver's intent based on input from the accelerator pedal position sensors, then calculates the appropriate throttle response based on the throttle position sensors. The Direct Current (DC) motor, located in the Throttle Body Assembly, drives the throttle blade. In order to decrease idle speed, along with spark and fuel delivery changes the ECM commands the throttle closed reducing air flow into the engine and the idle speed decreases. In order to increase idle speed, the ECM commands the throttle plate open allowing more air to pass the throttle plate. The Diagnostic Trouble Code (DTC) will be set when the actual idle speed is approximately 188 RPM greater than the desired idle speed.

OBDII Code P0507 2014 GMC Sierra - Idle Speed High - AutoCodes.com — P0507 2014 GMC Sierra Code - Idle Speed High

What does this mean?

What are the Possible Causes of the DTC P0507 2014 GMC Sierra?

Dirty Throttle Body
Intake air leak
Throttle Body misadjusted or damaged
Faulty Electric Throttle Actuator Motor (Located in the Throttle Body Assembly)
Electric Throttle Actuator Motor harness is open or shorted
Electric Throttle Actuator Motor circuit poor electrical connection

How to Fix the DTC P0507 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

If there are no intake leaks, clean the throttle body, adjust the engine idle, and clear the engine code. If the code persists you must replace the Electric Throttle Actuator Motor (Located in the Throttle Body Assembly).

The Engine Control Module (ECM) learns the idle position of the throttle plate to ensure the correct idle. Anytime the throttle body is cleaned or replaced, the ECM must learn the new throttle position. The idle may be unstable or a DTC may be set if the throttle position is not learned.

Chevrolet Throttle Body Cleaning and Idle Learning Procedure

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0507 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0507 2014 GMC Sierra code?

Need more information on how to fix the P0507 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0507 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0507 2014 GMC Sierra Code

1. What are the common symptoms of OBDII code P0507 on a 2014 GMC Sierra?

- Common symptoms include high idle speed, rough idling, stalling at stops, and the Check Engine light illuminated on the dashboard.

2. What can cause the OBDII code P0507 indicating high idle speed in a 2014 GMC Sierra?

- The high idle speed in a 2014 GMC Sierra can be caused by a dirty or faulty idle air control valve, a vacuum leak, a malfunctioning throttle body, or issues with the engine's air intake system.

3. How can I diagnose the OBDII code P0507 on my 2014 GMC Sierra?

- To diagnose the P0507 code, you can use an OBDII scanner to read the code and check for any related codes. Additionally, you can inspect the idle air control valve, throttle body, and vacuum lines for any signs of damage or wear.

4. Can a dirty throttle body cause the OBDII code P0507 in a 2014 GMC Sierra?

- Yes, a dirty throttle body can restrict airflow and disrupt the engine's idle speed control, potentially triggering the P0507 code in a 2014 GMC Sierra.

5. What are some repair tips for addressing the OBDII code P0507 on a 2014 GMC Sierra?

- Repair tips include cleaning or replacing the idle air control valve, cleaning the throttle body, checking and repairing any vacuum leaks, and ensuring the air intake system is free from obstructions.

6. Is it safe to continue driving a 2014 GMC Sierra with the OBDII code P0507 indicating high idle speed?

- It is not recommended to drive a vehicle with the P0507 code for an extended period, as it can lead to poor fuel economy, engine performance issues, and potential damage to engine components.

7. Can a faulty oxygen sensor trigger the OBDII code P0507 on a 2014 GMC Sierra?

- While a faulty oxygen sensor is not a direct cause of the P0507 code, it can contribute to poor engine performance, which may indirectly lead to high idle speed and trigger the code.

8. How much does it typically cost to repair the OBDII code P0507 on a 2014 GMC Sierra?

- Repair costs for the P0507 code can vary depending on the underlying cause and the labor rates in your area. It is advisable to consult with a mechanic for an accurate estimate.

9. Will disconnecting the battery reset the OBDII code P0507 on a 2014 GMC Sierra?

- Disconnecting the battery may reset the code temporarily, but if the underlying issue causing the P0507 code is not addressed, it is likely to reappear after driving the vehicle for some time.

10. Can a clogged air filter trigger the OBDII code P0507 in a 2014 GMC Sierra?

- A clogged air filter can restrict airflow to the engine, affecting the idle speed control and potentially contributing to the P0507 code in a 2014 GMC Sierra. Regular air filter maintenance is recommended to prevent such issues.