P0507 2012 NISSAN ROGUE Code - Idle Control System RPM Higher Than Expected
|P0507 2012 NISSAN ROGUE code possible causes
- Dirty throttle body
- Electric throttle control actuator misadjusted or damaged
- Faulty Electric throttle control actuator
- Intake air leak
- Poor electrical connection to the Intake Air Control (IAC) valve
|How do I fix the P0507 2012 NISSAN ROGUE code?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|P0507 2012 NISSAN ROGUE code tech notesIf there are no intake leaks, clean throttle body, adjust engine idle and erase engine code. If the code comes back you may have to replace the Electric Throttle Control Actuator (Motor) to repair the problem.
Nissan Rogue Idle Air Volume Relearn
P0507 Code Relearn Idle Air Volume Relearn Procedure
User Submitted Video
|Cost of diagnosing the P0507 2012 NISSAN ROGUE code
Labor: 1.0The cost of diagnosing the P0507 2012 NISSAN ROGUE code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|When is the P0507 2012 NISSAN ROGUE code detected?The idle speed is more than the target idle speed by 200 rpm or more.
|What are P0507 2012 NISSAN ROGUE code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
- Engine hard to start
- Rough or erratic idle speed
|P0507 2012 NISSAN ROGUE code descriptionThe Engine Control Module (ECM) controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. The operating of the throttle valve is varied to allow for optimum control of the engine idling speed. The ECM calculates the actual engine speed from signals of crankshaft position sensor (POS) and camshaft position sensor.
The ECM controls the electric throttle control actuator so that the engine speed coincides with the target value memorized in the ECM. The target engine speed is the lowest speed at which the engine can operate steadily. The optimum value stored in the ECM is determined by taking into consideration various engine conditions, such as during warming up, deceleration, and engine load (air conditioner, power steering and cooling fan operation, etc.)
|Need more information with the P0507 2012 NISSAN ROGUE code?Need more information on how to fix the P0507 2012 NISSAN ROGUE code? Get Access to Factory Service Manuals
|Need help with a P0507 2012 NISSAN ROGUE code?Get the P0507 2012 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
|P0507 2012 NISSAN ROGUE code commentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0507 2012 Nissan Rogue code? Have you replaced any parts?
Any information is appreciated. Thanks