P0507 2011 Ford Fusion Code - Idle Air Control System RPM Higher Than Expected
Quick Answer
The Powertrain Control Module (PCM) controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the Electronic Throttle Actuator Control (TAC). Common causes include Dirty Throttle Body, Faulty Electronic Throttle Actuator Control (TAC), Electronic Throttle Actuator Control harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0507 2011 Ford Fusion indicates Idle Air Control System RPM Higher Than Expected.
- Common causes
- Common causes include Dirty Throttle Body, Faulty Electronic Throttle Actuator Control (TAC), Electronic Throttle Actuator Control harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0507 2011 Ford Fusion Description
The PCM controls the Electronic Throttle Actuator Control so that the engine speed coincides with the target value memorized in the PCM. The target engine speed is the lowest speed at which the engine can operate steadily. The optimum value stored in the PCM is determined by taking into consideration various engine conditions, such as during warming up, deceleration, and engine load (air conditioner, power steering, and cooling fan operation, etc.).
The Diagnostic Trouble Code (DTC) will set the idle speed is more than the target idle speed by 200 rpm or more.
What are the Possible Causes of the DTC P0507 2011 Ford Fusion?
- Dirty Throttle Body
- Faulty Electronic Throttle Actuator Control (TAC)
- Electronic Throttle Actuator Control harness is open or shorted
- Electronic Throttle Actuator Control circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0507 2011 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0507 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0507 2011 Ford Fusion code?
Need more information on how to fix the P0507 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0507 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0507 2011 Ford Fusion Code
1. What are the common symptoms of OBDII code P0507 in a 2011 Ford Fusion?
- Common symptoms include high idle speed, rough idling, stalling at low speeds, and potential difficulty with acceleration.
2. What does the OBDII code P0507 indicate in a 2011 Ford Fusion?
- OBDII code P0507 indicates that the idle air control system RPM is higher than expected in the vehicle.
3. What are some possible causes of OBDII code P0507 in a 2011 Ford Fusion?
- Possible causes include a dirty or faulty idle air control valve, a vacuum leak, a malfunctioning throttle body, or issues with the engine's computer system.
4. How can I diagnose the cause of OBDII code P0507 in my 2011 Ford Fusion?
- You can start by inspecting the idle air control valve, checking for vacuum leaks, testing the throttle body, and using an OBDII scanner to gather more information about the issue.
5. What are the potential risks of ignoring OBDII code P0507 in a 2011 Ford Fusion?
- Ignoring this code can lead to poor engine performance, decreased fuel efficiency, and potential damage to other components over time.
6. Can I drive my 2011 Ford Fusion with OBDII code P0507?
- It is not recommended to drive the vehicle with this code present, as it can lead to further issues and potential safety concerns.
7. How can I reset OBDII code P0507 in my 2011 Ford Fusion?
- You can reset the code by using an OBDII scanner to clear the code after addressing the underlying issue that caused it.
8. Are there any DIY repair tips for fixing OBDII code P0507 in a 2011 Ford Fusion?
- DIY repair tips include cleaning or replacing the idle air control valve, checking and repairing any vacuum leaks, and ensuring proper functioning of the throttle body.
9. How much does it typically cost to repair OBDII code P0507 in a 2011 Ford Fusion?
- The cost of repairs can vary depending on the cause of the issue, but it may range from a simple DIY fix to a more involved repair that could cost a few hundred dollars at a mechanic.
10. Can a mechanic help me fix OBDII code P0507 in my 2011 Ford Fusion?
- Yes, a qualified mechanic can diagnose and repair the underlying issue causing the code, ensuring proper functionality of the idle air control system in your vehicle.
Discuss the causes and fixes for P0507 2011 Ford Fusion OBDII Code
Code P0507 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
