P0507 2007 Nissan Maxima Code - Idle Control System RPM Higher Than Expected
Quick Answer
The Engine Control Module (ECM) controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. Common causes include Dirty throttle body, Electric throttle control actuator misadjusted or damaged, Faulty Electric throttle control actuator. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0507 2007 Nissan Maxima indicates Idle Control System RPM Higher Than Expected.
- Common causes
- Common causes include Dirty throttle body, Electric throttle control actuator misadjusted or damaged, Faulty Electric throttle control actuator.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0507 2007 Nissan Maxima Description
The ECM controls the electric throttle control actuator so that the engine speed coincides with the target value memorized in the ECM. The target engine speed is the lowest speed at which the engine can operate steadily. The optimum value stored in the ECM is determined by taking into consideration various engine conditions, such as during warming up, deceleration, and engine load (air conditioner, power steering and cooling fan operation, etc.)
What are the Possible Causes of the DTC P0507 2007 Nissan Maxima?
- Dirty throttle body
- Electric throttle control actuator misadjusted or damaged
- Faulty Electric throttle control actuator
- Intake air leak
- Poor electrical connection to the Intake Air Control (IAC) valve
How to Fix the DTC P0507 2007 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
P0507 Code Relearn Idle Air Volume Relearn Procedure
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0507 2007 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0507 2007 Nissan Maxima code?
Need more information on how to fix the P0507 2007 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0507 2007 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0507 2007 Nissan Maxima Code
1. What are the common symptoms of OBDII code P0507 in a 2007 Nissan Maxima?
- Common symptoms include high idle speed, rough idling, stalling at low speeds, and potential decrease in fuel efficiency.
2. What are the possible causes of OBDII code P0507 in a 2007 Nissan Maxima?
- The typical causes of this code include a faulty idle air control valve, vacuum leaks, a dirty throttle body, or issues with the electronic throttle control system.
3. How can I diagnose the cause of OBDII code P0507 in my 2007 Nissan Maxima?
- You can start by checking for vacuum leaks, cleaning the throttle body, inspecting the idle air control valve, and scanning for any other related trouble codes.
4. Can a dirty throttle body cause OBDII code P0507 in a 2007 Nissan Maxima?
- Yes, a dirty throttle body can restrict airflow and lead to high idle speed, triggering the P0507 trouble code.
5. How do I repair OBDII code P0507 in my 2007 Nissan Maxima?
- To repair this code, you may need to clean the throttle body, replace the idle air control valve if necessary, fix any vacuum leaks, and reset the engine control module.
6. Can a malfunctioning idle air control valve cause OBDII code P0507 in a 2007 Nissan Maxima?
- Yes, a faulty idle air control valve can disrupt the engine's idle speed control and result in the P0507 trouble code being triggered.
7. Is it safe to continue driving with OBDII code P0507 in my 2007 Nissan Maxima?
- It is not recommended to drive for an extended period with this code as it can lead to potential engine performance issues and affect drivability.
8. Will resetting the engine control module clear OBDII code P0507 in a 2007 Nissan Maxima?
- Resetting the engine control module may temporarily clear the code, but if the underlying issue persists, the code is likely to return.
9. How can I prevent OBDII code P0507 from appearing in my 2007 Nissan Maxima in the future?
- Regular maintenance, including cleaning the throttle body and checking for vacuum leaks, can help prevent the recurrence of P0507 in the future.
10. Do I need a professional mechanic to fix OBDII code P0507 in my 2007 Nissan Maxima?
- While some DIY enthusiasts may be able to address the issue themselves, it is advisable to consult a professional mechanic for a proper diagnosis and repair of the problem triggering the P0507 code.
Discuss the causes and fixes for P0507 2007 Nissan Maxima OBDII Code
-
Yes performing the "Idle Learning Procedure", should work on your vehicle as well.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
