AutoCodes - OBDII Code List - P0506 HONDA

P0506 HONDA - Idle Control System RPM Lower Than Expected

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3    What is this?
Table of contents

P0506 HONDA Possible Causes

  • Dirty throttle body
  • Electric throttle control actuator misadjusted or damaged
  • Faulty Electric throttle control actuator
  • Intake air leak
  • Poor electrical connection to the Intake Air Control (IAC) valve

How do I fix code P0506 HONDA?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
How much do you know about cars?

Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge

Play Now

Tech Notes

If there are no intake leaks, clean throttle body, adjust engine idle and erase engine code. If the code comes back you may have to replace the Electric Throttle Control Actuator (Motor) to repair the problem.

Cost of diagnosing the P0506 HONDA code

Labor: 1.0

The cost of diagnosing the P0506 HONDA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

When is the code detected?

The idle speed is less than the target idle speed by 100 rpm or more.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Engine hard to start
  • Rough or erratic idle speed

P0506 HONDA Description

The Engine Control Module (ECM) controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. The operating of the throttle valve is varied to allow for optimum control of the engine idling speed. The ECM calculates the actual engine speed from signals of crankshaft position sensor (POS) and camshaft position sensor.
The ECM controls the electric throttle control actuator so that the engine speed coincides with the target value memorized in the ECM. The target engine speed is the lowest speed at which the engine can operate steadily. The optimum value stored in the ECM is determined by taking into consideration various engine conditions, such as during warming up, deceleration, and engine load (air conditioner, power steering and cooling fan operation, etc.)
OBDII Code P0506 Honda - Idle Control System RPM Lower Than Expected - AutoCodes.com

More Information

Need more information on how to fix the P0506 HONDA code?
Get Access to Factory Service Manuals

Need more help?

Get the P0506 Honda code diagnosed by a professional: Find a repair shop in your area

Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0506 Honda code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧