P0506 2010 Nissan Rogue Code - Idle Speed Control System RPM Lower Than Expected
Quick Answer
The Engine Control Module (ECM) controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. Common causes include Dirty throttle body, Electric throttle control actuator misadjusted or damaged, Faulty Electric throttle control actuator. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0506 2010 Nissan Rogue indicates Idle Speed Control System RPM Lower Than Expected.
- Common causes
- Common causes include Dirty throttle body, Electric throttle control actuator misadjusted or damaged, Faulty Electric throttle control actuator.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0506 2010 Nissan Rogue Description
The ECM controls the electric throttle control actuator so that the engine speed coincides with the target value memorized in the ECM. The target engine speed is the lowest speed at which the engine can operate steadily. The optimum value stored in the ECM is determined by taking into consideration various engine conditions, such as during warming up, deceleration, and engine load (air conditioner, power steering and cooling fan operation, etc.)
What are the Possible Causes of the DTC P0506 2010 Nissan Rogue?
- Dirty throttle body
- Electric throttle control actuator misadjusted or damaged
- Faulty Electric throttle control actuator
- Electric throttle control actuator harness is open or shorted
- Electric throttle control actuator circuit poor electrical connection
- Intake air leak
How to Fix the DTC P0506 2010 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
Nissan Rogue Idle Air Volume Relearn
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0506 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0506 2010 Nissan Rogue code?
Need more information on how to fix the P0506 2010 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0506 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0506 2010 Nissan Rogue Code
What does OBDII code P0506 mean for a 2010 Nissan Rogue?
Code P0506 indicates that the Engine Control Module (ECM) has detected that the engine idle speed is lower than expected, which can lead to rough idling or stalling.
What are common symptoms of the P0506 code?
Common symptoms include rough idle, stalling when the engine is at low RPM, decreased fuel efficiency, and potentially triggering the check engine light.
What could cause the P0506 code to trigger?
Causes may include a vacuum leak, faulty idle air control (IAC) valve, dirty throttle body, weak engine performance, or issues with the ECM.
How can I diagnose the P0506 code?
Start by checking for vacuum leaks, inspecting the IAC valve, cleaning the throttle body, and checking the wiring and connectors related to the idle control system.
What repairs are commonly needed for a P0506 code?
Repairs may involve cleaning or replacing the IAC valve, fixing vacuum leaks, cleaning the throttle body, or reprogramming/replacing the ECM if necessary.
Can I drive my 2010 Nissan Rogue with a P0506 code?
While it may be drivable, it’s not advisable to ignore the code as it could lead to further engine performance issues or stalling.
How much does it typically cost to fix the P0506 code?
Repair costs can vary widely but may range from $100 to $500, depending on whether it’s a simple cleaning or a more complex repair like replacing the IAC valve.
Is a check engine light always present with the P0506 code?
Typically, yes. The check engine light will illuminate when the P0506 code is triggered, but there may be instances where it is not visible due to other issues.
Can I clear the P0506 code myself?
Yes, you can clear the code using an OBDII scanner, but it’s important to address the underlying issue to prevent the code from returning.
Discuss the causes and fixes for P0506 2010 Nissan Rogue OBDII Code
Code P0506 2010 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
