AutoCodesMitsubishi – P0500 Mitsubishi

P0500 Mitsubishi Code - Vehicle Speed Sensor Malfunction

Quick Answer

The vehicle speed sensor outputs a 4 pulse signal for every revolution of the rotor shaft, which is rotated by the transmission output shaft via the driven gear. Common causes include Faulty Vehicle Speed Sensor, Vehicle speed sensor harness or connectors is open or shorted, Vehicle speed sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0500 Mitsubishi indicates Vehicle Speed Sensor Malfunction.
Common causes
Common causes include Faulty Vehicle Speed Sensor, Vehicle speed sensor harness or connectors is open or shorted, Vehicle speed sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 36,674
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0500 Mitsubishi Description

The vehicle speed sensor outputs a 4 pulse signal for every revolution of the rotor shaft, which is rotated by the transmission output shaft via the driven gear. After this signal is converted into a more precise rectangular waveform by the waveform shaping circuit inside the combination meter, it is then transmitted to the Engine Control Module (ECM). The ECM determines the vehicle speed based on the frequency of these pulse signals.
OBDII Code P0500 Mitsubishi - Vehicle Speed Sensor Malfunction - AutoCodes.com
P0500 Mitsubishi Code - Vehicle Speed Sensor Malfunction

What are the Possible Causes of the DTC P0500 Mitsubishi?

  • Faulty Vehicle Speed Sensor
  • Vehicle speed sensor harness or connectors is open or shorted
  • Vehicle speed sensor circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0500 Mitsubishi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0500 Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0500 Mitsubishi code?

Need more information on how to fix the P0500 Mitsubishi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0500 Mitsubishi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0500 Mitsubishi Code

1. What are the common symptoms of OBDII code P0500 (Vehicle Speed Sensor Malfunction) in a Mitsubishi?

- Common symptoms include erratic speedometer readings, inoperable cruise control, harsh shifting in automatic transmissions, and an illuminated check engine light.

2. What are the typical causes of the P0500 code in a Mitsubishi vehicle?

- The P0500 code is usually triggered by a faulty vehicle speed sensor (VSS), damaged wiring or connectors associated with the VSS, or a malfunctioning instrument cluster.

3. How does a malfunctioning vehicle speed sensor affect the performance of a Mitsubishi?

- A malfunctioning VSS can lead to inaccurate speed readings, which can affect the vehicle's transmission shifting, cruise control operation, and overall drivability.

4. Can I drive my Mitsubishi with the P0500 code present?

- While you can still drive the vehicle with the P0500 code, it is recommended to address the issue promptly to prevent potential transmission problems and ensure accurate speed readings.

5. What are some DIY repair tips for fixing the P0500 code in a Mitsubishi?

- DIY repair tips include checking and cleaning the VSS connector, inspecting the wiring for any damage, and replacing the VSS if necessary. It is also advisable to reset the trouble codes after any repairs.

6. Is it necessary to replace the entire vehicle speed sensor if the P0500 code appears?

- In most cases, replacing the entire VSS is the most effective solution to resolve the P0500 code. However, ensure to diagnose the issue accurately before proceeding with the replacement.

7. Can a faulty vehicle speed sensor impact fuel efficiency in a Mitsubishi?

- Yes, a faulty VSS can affect the vehicle's fuel efficiency by causing transmission issues that may lead to inefficient gear shifting and increased fuel consumption.

8. Will the P0500 code reset itself after the vehicle speed sensor is replaced in a Mitsubishi?

- After replacing the faulty VSS and fixing the underlying issue, the P0500 code can be cleared by using an OBDII scanner or disconnecting the vehicle's battery for a few minutes.

9. How much does it typically cost to repair the P0500 code in a Mitsubishi at a professional auto repair shop?

- The cost of repairing the P0500 code in a Mitsubishi can vary depending on the extent of the issue, but it may range from $100 to $300, including parts and labor.

10. Is it recommended to seek professional assistance for diagnosing and repairing the P0500 code in a Mitsubishi?

- If you are unsure about diagnosing or repairing the P0500 code, it is advisable to seek professional assistance from a certified mechanic to ensure proper diagnosis and resolution of the issue.

Discuss the causes and fixes for P0500 Mitsubishi OBDII Code

  • I have a 2014 Mitsubishi Mirage es it has 14 inch tires on the front and 18 inch tires on the back is this going to be a problem for my speed sensor

  • It may trigger the ABS warning light.

  • I have a 2014 Outlander Sport with only this P0500 error code. The speedometer works fine. The dealer wants me to spend $1300 on a new power control module. Is this legit? If I needed a new computer, wouldn’t there be more symptoms? Other than the check engine light the car operates fine. The code however is preventing the car to pass an Ohio ECheck.

  • It is difficult to say why they recommend the Powertrain Control Module (PCM) since the code is for the Vehicle Speed Sensor.
    Did you ask them why they recommend the PCM?
    According to the factory service manual if the sensor, wires and connector check OK, then the problem is the PCM.
    If they cant explain why they have to replace the PCM, then I recommend getting a second opinion.

  • I have a Mitshubishi ASX 2012 with only the PO500 error code. It is a 5-speed manual transmission. The spedometer is working fine. Is it possible that it can only be the vehicle speed sensor?

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play