AutoCodes – Jeep – P0500 Jeep

P0500 Jeep Code - No Vehicle Speed Sensor

Quick Answer

The vehicle speed sensor outputs a pulse signal for every revolution of the rotor shaft, which is rotated by the transmission output shaft via the driven gear. Common causes include Faulty Vehicle Speed Sensor, Vehicle speed sensor harness or connectors is open or shorted, Vehicle speed sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0500 Jeep indicates No Vehicle Speed Sensor.
Common causes: Common causes include Faulty Vehicle Speed Sensor, Vehicle speed sensor harness or connectors is open or shorted, Vehicle speed sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 24,910

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0500 Jeep Description

The vehicle speed sensor outputs a pulse signal for every revolution of the rotor shaft, which is rotated by the transmission output shaft via the driven gear. After this signal is converted into a more precise rectangular waveform by the waveform shaping circuit inside the combination meter, it is then transmitted to the Engine Control Module (ECM). The ECM determines the vehicle speed based on the frequency of these pulse signals.

OBDII Code P0500 Jeep - No Vehicle Speed Sensor - AutoCodes.com — P0500 Jeep Code - No Vehicle Speed Sensor

What does this mean?

What are the Possible Causes of the DTC P0500 Jeep?

Faulty Vehicle Speed Sensor
Vehicle speed sensor harness or connectors is open or shorted
Vehicle speed sensor circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0500 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0500 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0500 Jeep code?

Need more information on how to fix the P0500 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0500 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0500 Jeep Code

1. What are the common symptoms of OBDII code P0500 in a Jeep?

- Common symptoms include a non-functioning speedometer, erratic or incorrect speed readings on the dashboard, and the check engine light being illuminated.

2. What does the OBDII code P0500 "No Vehicle Speed Sensor" indicate in a Jeep?

- The code indicates that the vehicle's ECM (Engine Control Module) is not receiving a signal from the Vehicle Speed Sensor (VSS) or the signal is not accurate.

3. What are the possible causes of OBDII code P0500 in a Jeep?

- Possible causes include a faulty VSS, damaged VSS wiring harness, corroded or loose connections, or issues with the ECM itself.

4. How can I diagnose the cause of OBDII code P0500 in my Jeep?

- You can diagnose the issue by checking the VSS wiring and connections, testing the VSS for proper functionality, and using a diagnostic scanner to read live data from the VSS.

5. Can a malfunctioning VSS affect the performance of my Jeep?

- Yes, a malfunctioning VSS can cause issues with the transmission shifting, cruise control operation, and overall drivability of the vehicle.

6. Is it safe to drive my Jeep with OBDII code P0500 triggered?

- It is generally safe to drive with the code P0500, but it is recommended to have the issue diagnosed and repaired as soon as possible to prevent further potential problems.

7. How can I repair OBDII code P0500 in my Jeep?

- The repair usually involves replacing the faulty VSS, repairing or replacing damaged wiring, and clearing the code using a diagnostic scanner.

8. Can I reset the OBDII code P0500 in my Jeep without fixing the underlying issue?

- While you can clear the code temporarily, it will likely reappear until the root cause of the problem (such as a faulty VSS) is addressed.

9. How much does it typically cost to repair OBDII code P0500 in a Jeep?

- The cost can vary depending on the specific issue, but replacing a VSS in a Jeep can range from $100 to $300, including parts and labor.

10. Are there any preventive measures to avoid OBDII code P0500 in a Jeep?

- Regular vehicle maintenance, including checking the VSS and its connections during scheduled service intervals, can help prevent issues that trigger the P0500 code.