AutoCodes – Generic – P0495

P0495 Code - Fan Speed High

Quick Answer

The cooling fan relay sends a Pulse Width Modulation (PWM) signal of 12 - 14 volts to the cooling fan clutch through the cooling fan clutch solenoid voltage control circuit. Common causes include Faulty Cooling Fan Relay, Cooling Fan Relay harness is open or shorted, Cooling Fan Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0495 indicates Fan Speed High.
Common causes: Common causes include Faulty Cooling Fan Relay, Cooling Fan Relay harness is open or shorted, Cooling Fan Relay circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 23,070

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 29, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0495 Description

The cooling fan relay sends a Pulse Width Modulation (PWM) signal of 12 - 14 volts to the cooling fan clutch through the cooling fan clutch solenoid voltage control circuit. The cooling fan relay varies the voltage drop across the cooling fan clutch solenoid in relation to a pulse width modulated signal from the Engine Control Module (ECM) in order to control the speed of the cooling fan. The signal controls the position of the oil control valve inside the cooling fan clutch housing. The Diagnostic Trouble Code (DTC) will be set if the clutch fluid pump-out, which is the time it takes for the fan clutch to disengage completely, is greater than a range of 10 minutes at sea level to 52 minutes at elevations of 6, 500 ft.

OBDII Code P0495 - Fan Speed High - AutoCodes.com — P0495 Code - Fan Speed High

What does this mean?

What are the Possible Causes of the DTC P0495?

Faulty Cooling Fan Relay
Cooling Fan Relay harness is open or shorted
Cooling Fan Relay circuit poor electrical connection
Faulty cooling fan clutch
Faulty control unit

How to Fix the DTC P0495?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0495 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0495 code?

Need more information on how to fix the P0495 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0495 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P0495 Buick — Fan Speed High
P0495 Cadillac — Fan Speed High
P0495 Chevrolet — Fan Speed High
P0495 GMC — Fan Speed High
P0495 Isuzu — Cooling Fan Speed High

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.