P047B Dodge Code - Exhaust Pressure Sensor 'B' Circuit Range/Performance
Quick Answer
The Exhaust Back Pressure (EBP) sensor is a variable capacitance sensor that, when supplied with a 5-volt reference signal from the Engine Control Module (ECM), produces a linear analog voltage signal that indicates pressure. Common causes include Faulty Exhaust Back Pressure Sensor 'B', Exhaust Back Pressure Sensor 'B' harness is open or shorted, Exhaust Back Pressure Sensor 'B' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P047B Dodge indicates Exhaust Pressure Sensor 'B' Circuit Range/Performance.
- Common causes
- Common causes include Faulty Exhaust Back Pressure Sensor 'B', Exhaust Back Pressure Sensor 'B' harness is open or shorted, Exhaust Back Pressure Sensor 'B' circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P047B Dodge Description
The EBP sensor's primary function is to measure exhaust back pressure so that the ECM can control the exhaust back pressure regulator (EPR) when needed.
What are the Possible Causes of the DTC P047B Dodge?
- Faulty Exhaust Back Pressure Sensor 'B'
- Exhaust Back Pressure Sensor 'B' harness is open or shorted
- Exhaust Back Pressure Sensor 'B' circuit poor electrical connection
How to Fix the DTC P047B Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P047B Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P047B Dodge code?
Need more information on how to fix the P047B Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P047B Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P047B Dodge Code
1. What are the common symptoms of OBDII code P047B in a Dodge vehicle?
- Common symptoms include reduced engine power, poor fuel efficiency, and the illumination of the check engine light.
2. What can cause the OBDII code P047B to trigger in a Dodge vehicle?
- The code may be triggered due to a faulty exhaust pressure sensor, wiring issues, exhaust leaks, or a malfunctioning diesel particulate filter (DPF).
3. How can I diagnose the cause of OBDII code P047B in my Dodge?
- To diagnose the issue, you can use an OBDII scanner to read the code and then inspect the exhaust pressure sensor, wiring connections, and the DPF for any visible damage.
4. Can I continue driving my Dodge with OBDII code P047B present?
- It is not recommended to continue driving with the code present, as it can lead to further damage to the engine or emissions system.
5. How can I repair OBDII code P047B in my Dodge?
- Repairing the code typically involves replacing the faulty exhaust pressure sensor, repairing any damaged wiring, fixing exhaust leaks, or addressing issues with the DPF.
6. Is it possible to reset OBDII code P047B in a Dodge without fixing the underlying issue?
- While you can clear the code temporarily, it is likely to return if the root cause of the problem is not addressed.
7. Can a DIYer fix OBDII code P047B in a Dodge, or is professional help necessary?
- Depending on your skill level and access to tools, DIY repair is possible for simpler issues like sensor replacement. However, complex problems may require professional help.
8. What are the long-term effects of ignoring OBDII code P047B in a Dodge?
- Ignoring the code can lead to reduced engine performance, increased emissions, and potential damage to other components in the emissions system.
9. How much does it typically cost to repair OBDII code P047B in a Dodge at a mechanic or dealership?
- Repair costs can vary based on the underlying issue, but expect to pay for the replacement of the exhaust pressure sensor, any necessary parts, and labor fees.
10. Are there any preventive measures to avoid OBDII code P047B in a Dodge in the future?
- Regular maintenance, such as inspecting and cleaning the DPF, checking wiring connections, and using quality diesel fuel, can help prevent issues that trigger this code.
Discuss the causes and fixes for P047B Dodge OBDII Code
Code P047B Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
