P0470 Mercedes-Benz Code - Exhaust Pressure Sensor Malfunction
Quick Answer
The Exhaust Back Pressure (EBP) sensor is a variable capacitance sensor that, when supplied with a 5-volt reference signal from the Engine Control Module (ECM), produces a linear analog voltage signal that indicates pressure. Common causes include Faulty Exhaust Back Pressure Sensor, Exhaust Back Pressure Sensor harness is open or shorted, Exhaust Back Pressure Sensor circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0470 Mercedes-Benz indicates Exhaust Pressure Sensor Malfunction.
- Common causes
- Common causes include Faulty Exhaust Back Pressure Sensor, Exhaust Back Pressure Sensor harness is open or shorted, Exhaust Back Pressure Sensor circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0470 Mercedes-Benz Description
The EBP sensor's primary function is to measure exhaust back pressure so that the ECM can control the exhaust back pressure regulator (EPR) when needed.
What are the Possible Causes of the DTC P0470 Mercedes-Benz?
- Faulty Exhaust Back Pressure Sensor
- Exhaust Back Pressure Sensor harness is open or shorted
- Exhaust Back Pressure Sensor circuit poor electrical connection
How to Fix the DTC P0470 Mercedes-Benz?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0470 Mercedes-Benz code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0470 Mercedes-Benz code?
Need more information on how to fix the P0470 Mercedes-Benz code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0470 Mercedes-Benz code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0470 Mercedes-Benz Code
1. What are the common symptoms of OBDII code P0470 in a Mercedes-Benz related to the Exhaust Pressure Sensor Malfunction?
- Common symptoms include loss of power, reduced fuel efficiency, rough idling, and the illumination of the check engine light.
2. What can cause the Exhaust Pressure Sensor Malfunction in a Mercedes-Benz, triggering code P0470?
- Potential causes include a faulty exhaust pressure sensor, wiring issues, a clogged DPF (diesel particulate filter), or a problem with the exhaust system.
3. How can I diagnose the Exhaust Pressure Sensor Malfunction in my Mercedes-Benz when OBDII code P0470 is triggered?
- Diagnosis involves using a scan tool to read the code, checking the exhaust pressure sensor for proper operation, inspecting wiring for damage, and ensuring the DPF is not clogged.
4. Is it safe to continue driving my Mercedes-Benz with OBDII code P0470 related to the Exhaust Pressure Sensor Malfunction?
- It is not recommended to continue driving the vehicle with this code, as it can lead to further damage and decreased performance. It is best to address the issue promptly.
5. Can I reset the OBDII code P0470 related to the Exhaust Pressure Sensor Malfunction in my Mercedes-Benz by clearing the fault code?
- Clearing the fault code may temporarily turn off the check engine light, but it will not fix the underlying issue causing the code. The problem should be properly diagnosed and repaired.
6. What are some repair tips for addressing OBDII code P0470 in a Mercedes-Benz due to the Exhaust Pressure Sensor Malfunction?
- Repair tips include replacing the faulty exhaust pressure sensor, repairing damaged wiring, cleaning or replacing the DPF if necessary, and ensuring the exhaust system is functioning correctly.
7. Will a Mercedes-Benz dealership be able to diagnose and repair OBDII code P0470 related to the Exhaust Pressure Sensor Malfunction?
- Yes, a Mercedes-Benz dealership or a qualified mechanic with experience working on Mercedes-Benz vehicles should be able to diagnose and repair the issue effectively.
8. How much does it typically cost to repair OBDII code P0470 in a Mercedes-Benz caused by an Exhaust Pressure Sensor Malfunction?
- The cost of repair can vary depending on the specific cause of the issue, but it may range from $200 to $500 or more, including parts and labor.
9. Can a DIY enthusiast with automotive experience fix OBDII code P0470 related to the Exhaust Pressure Sensor Malfunction in a Mercedes-Benz?
- While some experienced DIY enthusiasts may be able to diagnose and replace the exhaust pressure sensor, it is recommended to seek professional help for accurate diagnosis and repair.
10. How can regular maintenance help prevent OBDII code P0470 in a Mercedes-Benz due to the Exhaust Pressure Sensor Malfunction?
- Regular maintenance, such as timely replacement of the DPF, checking for exhaust leaks, and inspecting the exhaust pressure sensor, can help prevent issues leading to code P0470.
Discuss the causes and fixes for P0470 Mercedes-Benz OBDII Code
Code P0470 Mercedes-Benz comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
