P0470 Dodge Code - Exhaust Pressure Sensor Malfunction
Quick Answer
The Exhaust Back Pressure (EBP) sensor is a variable capacitance sensor that, when supplied with a 5-volt reference signal from the Engine Control Module (ECM), produces a linear analog voltage signal that indicates pressure. Common causes include Faulty Exhaust Back Pressure Sensor, Exhaust Back Pressure Sensor harness is open or shorted, Exhaust Back Pressure Sensor circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0470 Dodge indicates Exhaust Pressure Sensor Malfunction.
- Common causes
- Common causes include Faulty Exhaust Back Pressure Sensor, Exhaust Back Pressure Sensor harness is open or shorted, Exhaust Back Pressure Sensor circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0470 Dodge Description
The EBP sensor's primary function is to measure exhaust back pressure so that the ECM can control the exhaust back pressure regulator (EPR) when needed.
What are the Possible Causes of the DTC P0470 Dodge?
- Faulty Exhaust Back Pressure Sensor
- Exhaust Back Pressure Sensor harness is open or shorted
- Exhaust Back Pressure Sensor circuit poor electrical connection
How to Fix the DTC P0470 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0470 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0470 Dodge code?
Need more information on how to fix the P0470 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0470 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0470 Dodge Code
1. What are common symptoms of OBDII code P0470 in a Dodge vehicle?
- Common symptoms include decreased engine performance, reduced fuel efficiency, and illuminated Check Engine light.
2. What does OBDII code P0470 indicate in a Dodge vehicle?
- OBDII code P0470 indicates a malfunction in the exhaust pressure sensor system.
3. What are possible causes of OBDII code P0470 in a Dodge vehicle?
- Possible causes include a faulty exhaust pressure sensor, damaged wiring or connectors, or issues with the exhaust system.
4. How can I diagnose the cause of OBDII code P0470 in my Dodge vehicle?
- A comprehensive diagnostic scan of the exhaust pressure sensor system using an OBDII scanner can help pinpoint the exact cause of the malfunction.
5. Can I still drive my Dodge vehicle with OBDII code P0470 present?
- It is not recommended to drive the vehicle with OBDII code P0470 present, as it can lead to further damage and potential safety hazards.
6. How can I repair OBDII code P0470 in my Dodge vehicle?
- Repairing OBDII code P0470 typically involves replacing the faulty exhaust pressure sensor and addressing any wiring or connector issues.
7. Is it possible to reset OBDII code P0470 in a Dodge vehicle without fixing the underlying issue?
- While you can clear the code temporarily, it will likely reappear until the root cause of the malfunction is addressed.
8. Can a DIY enthusiast repair OBDII code P0470 in a Dodge vehicle?
- Depending on your automotive skills and access to tools, a DIY enthusiast may be able to replace the exhaust pressure sensor and fix wiring issues associated with OBDII code P0470.
9. Will fixing OBDII code P0470 improve my Dodge vehicle's performance and fuel efficiency?
- Yes, resolving OBDII code P0470 can help restore optimal engine performance and fuel efficiency in your Dodge vehicle.
10. How can I prevent OBDII code P0470 from reoccurring in my Dodge vehicle?
- Regular maintenance, such as keeping the exhaust system clean and checking sensor connections, can help prevent OBDII code P0470 from reoccurring.
Discuss the causes and fixes for P0470 Dodge OBDII Code
Code P0470 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
