AutoCodes – GMC – P0459 2015 GMC Sierra

P0459 2015 GMC Sierra Code - Evaporative Emission Purge Solenoid Valve Control Circuit High Voltage

Quick Answer

The Evaporative Emission (EVAP) Purge Solenoid Valve is used to purge fuel vapor from the EVAP canister to the intake manifold. Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Valve, Evaporative Emission Purge Solenoid Valve harness is open or shorted, Evaporative Emission Purge Solenoid Valve circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P0459 2015 GMC Sierra indicates Evaporative Emission Purge Solenoid Valve Control Circuit High Voltage.
Common causes: Common causes include Faulty Evaporative Emission (EVAP) Purge Solenoid Valve, Evaporative Emission Purge Solenoid Valve harness is open or shorted, Evaporative Emission Purge Solenoid Valve circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 212

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 27, 2022

Description
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0459 2015 GMC Sierra Description

The Evaporative Emission (EVAP) Purge Solenoid Valve is used to purge fuel vapor from the EVAP canister to the intake manifold. The EVAP purge solenoid valve is Pulse Width Modulated (PWM). Ignition voltage is supplied directly to the EVAP purge solenoid valve. The Engine Control Module (ECM) controls the solenoid valve by grounding the control circuit with a solid-state device called a driver. The driver is equipped with a feedback circuit that is pulled up to a voltage. The ECM can determine if the control circuit is open, shorted to the ground, or shorted to a voltage by monitoring the feedback voltage. The Diagnostic Trouble Code (DTC) will be set when the ECM detects the EVAP purge solenoid valve control circuit is shorted to voltage within 0.25 s.

OBDII Code P0459 2015 GMC Sierra - Evaporative Emission Purge Solenoid Valve Control Circuit High Voltage - AutoCodes.com — P0459 2015 GMC Sierra Code - Evaporative Emission Purge Solenoid Valve Control Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P0459 2015 GMC Sierra?

Faulty Evaporative Emission (EVAP) Purge Solenoid Valve
Evaporative Emission Purge Solenoid Valve harness is open or shorted
Evaporative Emission Purge Solenoid Valve circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0459 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0459 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0459 2015 GMC Sierra code?

Need more information on how to fix the P0459 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0459 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.