P0457 Mitsubishi Code - EVAP Control System Leak Detected Fuel Filler Cap Loose/Off
Quick Answer
This diagnosis detects leaks in the Evaporative Emission System (EVAP) purge line using engine intake manifold vacuum. Common causes include Damaged, missing or loosely installed fuel filler cap. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0457 Mitsubishi indicates EVAP Control System Leak Detected Fuel Filler Cap Loose/Off.
- Common causes
- Common causes include Damaged, missing or loosely installed fuel filler cap.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0457 Mitsubishi Description
The vacuum cut valve bypass valve is opened to clear the line between the fuel tank and the EVAP canister purge volume control solenoid valve. The EVAP canister vent control valve will then be closed to shut the EVAP purge line off. The EVAP canister purge volume control solenoid valve is opened to depressurize the EVAP purge line using intake manifold vacuum. After this depressurization is implemented, the EVAP canister purge volume control solenoid valve will be closed.
What are the Possible Causes of the DTC P0457 Mitsubishi?
- Damaged, missing or loosely installed fuel filler cap
How to Fix the DTC P0457 Mitsubishi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0457 Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0457 Mitsubishi code?
Need more information on how to fix the P0457 Mitsubishi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0457 Mitsubishi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0457 Mitsubishi Code
1. What does OBDII code P0457 in a Mitsubishi mean?
Code P0457 indicates that the vehicle's onboard diagnostics system has detected a leak in the EVAP control system due to a loose or missing fuel filler cap.
2. What are the common symptoms of a P0457 code in a Mitsubishi?
Common symptoms of a P0457 code include the check engine light illuminating on the dashboard and potential fuel odor near the vehicle.
3. What are the possible causes of a P0457 code in a Mitsubishi?
The most common cause of a P0457 code in a Mitsubishi is a loose, improperly installed, or missing fuel filler cap. Other causes may include a damaged EVAP system component or a leak elsewhere in the system.
4. How serious is a P0457 code in a Mitsubishi?
While a P0457 code is not an immediate cause for concern in terms of vehicle safety, it can negatively impact fuel economy and emissions if left unresolved.
5. How can I diagnose a P0457 code in my Mitsubishi?
Diagnosing a P0457 code typically involves checking the fuel filler cap for proper installation and condition, inspecting the EVAP system components for damage or leaks, and using a scan tool to reset the code for further monitoring.
6. How do I repair a P0457 code in my Mitsubishi?
To repair a P0457 code, start by checking and tightening or replacing the fuel filler cap if necessary. If the issue persists, further inspection of the EVAP system components may be needed to identify and address any leaks or damage.
7. Can I drive my Mitsubishi with a P0457 code?
It is generally safe to drive your Mitsubishi with a P0457 code, but it is recommended to address the issue promptly to prevent potential fuel economy and emissions problems.
8. How long does it take to fix a P0457 code in a Mitsubishi?
The time needed to fix a P0457 code can vary depending on the cause of the issue. In many cases, resolving the code by tightening or replacing the fuel filler cap can be done quickly, while further diagnosis and repairs may take longer.
9. Will a P0457 code reset itself in a Mitsubishi?
If the underlying issue causing the P0457 code is resolved, the code may reset itself after a certain number of drive cycles. However, using a scan tool to clear the code manually is often recommended to ensure proper diagnosis and monitoring.
10. Can a loose gas cap cause a P0457 code in a Mitsubishi?
Yes, a loose, improperly installed, or missing fuel filler cap is a common cause of a P0457 code in a Mitsubishi. Ensuring the gas cap is tightened properly or replaced if damaged can often resolve the issue.
Discuss the causes and fixes for P0457 Mitsubishi OBDII Code
Code P0457 Mitsubishi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
