P0455 MERCEDES-BENZ - Evaporative Emission Control System Leak Detected Gross Leak
P0455 MERCEDES-BENZ Possible Causes
- Missing or loose fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- EVAP canister or fuel tank leaks
- EVAP system hose leaking
- Fuel tank leaking
First diagnose P0455 MERCEDES-BENZ code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
P0455 MERCEDES-BENZ Tech NotesThe P0455 it’s a very common code, because the code is set if the gas cap is loose or missing. Start by tighten the gas cap and clearing the code. In most cases the code can be clear by disconnecting the car battery for about 30 minutes.
Cost of diagnosing the P0455 MERCEDES-BENZ code
Labor: 1.0The cost of diagnosing the P0455 MERCEDES-BENZ code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the P0455 MERCEDES-BENZ code detected?Evaporative Emission System (EVAP) control system has a very large leak such as fuel filler cap fell off, EVAP control system does not operate properly.
P0455 MERCEDES-BENZ Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Possible a noticeable fuel odor caused by the release of fuel vapors
P0455 Mercedes-benz DescriptionThis diagnosis detects leaks in the Evaporative Emission System (EVAP) purge line using engine intake manifold vacuum. If pressure does not increase, the Engine Control Module (ECM) will check for leaks in the line between the fuel tank and EVAP canister purge volume control solenoid valve under the following vacuum test condition.
The vacuum cut valve bypass valve is opened to clear the line between the fuel tank and the EVAP canister purge volume control solenoid valve. The EVAP canister vent control valve will then be closed to shut the EVAP purge line off. The EVAP canister purge volume control solenoid valve is opened to depressurize the EVAP purge line using intake manifold vacuum. After this depressurization is implemented, the EVAP canister purge volume control solenoid valve will be closed.
P0455 MERCEDES-BENZ More InformationNeed more information on how to fix the P0455 MERCEDES-BENZ code?
Get Access to Factory Service Manuals
Need more help?Get the P0455 Mercedes-benz code diagnosed by a professional: Find a repair shop in your area
P0455 MERCEDES-BENZ CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0455 Mercedes-benz code? Have you replaced any parts?
Any information is appreciated. Thanks