P0454 2018 GMC Sierra Code - Fuel Tank Pressure Sensor Circuit Intermittent
Quick Answer
The fuel tank pressure sensor measures vapor pressure or vacuum in the Evaporative Emission (EVAP) system. Common causes include Faulty Fuel Tank Pressure (FTP) Sensor, Fuel Tank Pressure Sensor harness is open or shorted, Fuel Tank Pressure Sensor circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0454 2018 GMC Sierra indicates Fuel Tank Pressure Sensor Circuit Intermittent.
- Common causes
- Common causes include Faulty Fuel Tank Pressure (FTP) Sensor, Fuel Tank Pressure Sensor harness is open or shorted, Fuel Tank Pressure Sensor circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0454 2018 GMC Sierra Description
What are the Possible Causes of the DTC P0454 2018 GMC Sierra?
- Faulty Fuel Tank Pressure (FTP) Sensor
- Fuel Tank Pressure Sensor harness is open or shorted
- Fuel Tank Pressure Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0454 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0454 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0454 2018 GMC Sierra code?
Need more information on how to fix the P0454 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0454 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0454 2018 GMC Sierra Code
What does the OBDII code P0454 mean for a 2018 GMC Sierra?
P0454 indicates that the Engine Control Module (ECM) has detected an intermittent signal from the Fuel Tank Pressure (FTP) sensor, which monitors the pressure inside the fuel tank as part of the evaporative emission control (EVAP) system.
What are the common symptoms of code P0454 in a 2018 GMC Sierra?
Common symptoms include the check engine light turning on, reduced fuel efficiency, possible fuel odor near the vehicle, and issues during emissions testing.
What causes the P0454 code to appear in a 2018 GMC Sierra?
Potential causes include a faulty fuel tank pressure sensor, damaged or corroded wiring or connectors, a loose or damaged gas cap, or a malfunctioning EVAP system component.
Can I drive my 2018 GMC Sierra with the P0454 code?
While the vehicle may still be drivable, it is not recommended to ignore this code as it can lead to reduced fuel efficiency and may prevent the vehicle from passing emissions tests.
How do I fix the P0454 code on my 2018 GMC Sierra?
First, check the gas cap to ensure it is tight and not damaged. Then inspect the wiring and connectors for the fuel tank pressure sensor. If no issues are found, the sensor itself may need to be replaced.
What tools do I need to diagnose the P0454 code on a 2018 GMC Sierra?
You will need an OBDII scanner to pull the code and monitor sensor data, along with basic tools to inspect and repair wiring or replace the fuel tank pressure sensor.
How much does it cost to repair the P0454 code on a 2018 GMC Sierra?
Repair costs vary depending on the cause. Replacing a gas cap may cost around $20, while replacing the fuel tank pressure sensor could range from $150 to $300, including parts and labor.
Is the P0454 code specific to GMC Sierra, or does it apply to other vehicles?
The P0454 code is a generic OBDII code, so it can appear in many vehicles, but specific causes and solutions may vary by make and model.
How can I prevent the P0454 code from occurring on my 2018 GMC Sierra?
Regularly inspect and maintain the EVAP system components, ensure the gas cap is properly tightened, and address any wiring or sensor issues promptly.
Will the P0454 code trigger other diagnostic trouble codes in the 2018 GMC Sierra?
It is possible for P0454 to be accompanied by other EVAP-related codes, such as P0455 (EVAP system large leak) or P0442 (EVAP system small leak).
Discuss the causes and fixes for P0454 2018 GMC Sierra OBDII Code
Code P0454 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
