AutoCodes – Scion – P0452 Scion

P0452 Scion Code - Evaporative Emission Control System Pressure Sensor / Switch Low Input

Quick Answer

5 hours after the ignition switch is turned off, the leak detection pump creates negative pressure (vacuum) in the Evaporative Emission (EVAP) system. Common causes include Faulty Canister Pump Module, Canister Pump Module harness is open or shorted, Canister Pump Module circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P0452 Scion indicates Evaporative Emission Control System Pressure Sensor / Switch Low Input.
Common causes: Common causes include Faulty Canister Pump Module, Canister Pump Module harness is open or shorted, Canister Pump Module circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 7,286

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 26, 2024

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0452 Scion Description

5 hours after the ignition switch is turned off, the leak detection pump creates negative pressure (vacuum) in the Evaporative Emission (EVAP) system. The Engine Control Module (ECM) monitors for leaks and actuator malfunctions based on the EVAP pressure. The leak detection pump creates negative pressure through the reference orifice. When the system is normal, the EVAP pressure is between 97 to 100 kPa(abs) [726 to 750 mmHg(abs) (Typical value)] and saturated within a minute. If the canister pressure sensor voltage output (pressure) is less than 0.45 V: 42.11 kPa(abs) [315.867 mmHg(abs)], the ECM interprets this as an open or short circuit in the canister pressure sensor or its circuit, and stops the EVAP system monitor. The ECM then illuminates the MIL and stores the Diagnostic Trouble Code (DTC).
The Canister Pump Module is attached to the EVAP Canister and contains the Canister Pressure Sensor, the Leak Detection Pump, and the Vent Valve.

OBDII Code P0452 Scion - Evaporative Emission Control System Pressure Sensor / Switch Low Input - AutoCodes.com — P0452 Scion Code - Evaporative Emission Control System Pressure Sensor / Switch Low Input

What does this mean?

What are the Possible Causes of the DTC P0452 Scion?

Faulty Canister Pump Module
Canister Pump Module harness is open or shorted
Canister Pump Module circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0452 Scion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0452 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0452 Scion code?

Need more information on how to fix the P0452 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0452 Scion code diagnosed by a professional: Find a repair shop in your area

Information for Specific Scion Models

P0452 2005 Scion xB — EVAP System Pressure Sensor/Switch Low Input
P0452 2006 Scion xB — EVAP System Pressure Sensor/Switch Low Input
P0452 2007 Scion xB — EVAP System Pressure Sensor/Switch Low Input

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0452 Scion Code

1. What are common symptoms of OBDII code P0452 in a Scion related to the Evaporative Emission Control System Pressure Sensor / Switch Low Input?

The common symptoms include the Check Engine Light illuminating on the dashboard, decreased fuel efficiency, and potential issues with the vehicle's emission control system.

2. What are the possible causes of OBDII code P0452 in a Scion indicating the Evaporative Emission Control System Pressure Sensor / Switch Low Input?

Possible causes include a faulty pressure sensor or switch, damaged wiring or connectors in the system, a leak in the evaporative emissions system, or a problem with the vehicle's PCM (Powertrain Control Module).

3. How can I diagnose OBDII code P0452 in my Scion related to the Evaporative Emission Control System Pressure Sensor / Switch Low Input?

Diagnosis typically involves using an OBDII scanner to retrieve the specific trouble code, visually inspecting the pressure sensor and related components, checking for any visible leaks in the system, and testing the electrical connections for proper voltage.

4. Can I continue driving my Scion with OBDII code P0452 indicating the Evaporative Emission Control System Pressure Sensor / Switch Low Input?

While the vehicle may still be operational, it is recommended to address the issue promptly to prevent potential damage to the emission control system and ensure optimal fuel efficiency.

5. What are some repair tips for fixing OBDII code P0452 in a Scion related to the Evaporative Emission Control System Pressure Sensor / Switch Low Input?

Repair tips may include replacing the faulty pressure sensor or switch, repairing any damaged wiring or connectors, fixing leaks in the evaporative emissions system, and resetting the trouble code with an OBDII scanner after completing the repairs.

6. Is it possible to reset OBDII code P0452 in a Scion without fixing the underlying issue with the Evaporative Emission Control System Pressure Sensor / Switch Low Input?

While you can reset the code temporarily, the underlying issue must be addressed to prevent the Check Engine Light from reappearing and ensure the vehicle's emission control system functions correctly.

7. How much does it typically cost to repair OBDII code P0452 in a Scion related to the Evaporative Emission Control System Pressure Sensor / Switch Low Input?

The cost of repair can vary depending on the specific cause of the issue, the labor rates of the repair shop, and the cost of any replacement parts needed. It is advisable to get a diagnosis from a professional technician for an accurate estimate.

8. Can a DIY enthusiast fix OBDII code P0452 in a Scion indicating the Evaporative Emission Control System Pressure Sensor / Switch Low Input?

Depending on the individual's skill level and access to tools, some DIY enthusiasts may be able to address this issue themselves by following repair guides or tutorials specific to their vehicle model. However, for complex repairs or if unsure, it is recommended to consult a professional mechanic.

9. How urgent is it to address OBDII code P0452 in a Scion related to the Evaporative Emission Control System Pressure Sensor / Switch Low Input?

While the issue may not pose an immediate safety risk, it is advisable to address it in a timely manner to prevent potential damage to the vehicle's emission control system, ensure optimal fuel efficiency, and avoid potential emissions compliance issues.

10. Are there any preventive measures to reduce the likelihood of encountering OBDII code P0452 in a Scion due to the Evaporative Emission Control System Pressure Sensor / Switch Low Input?

Regularly inspecting the vehicle's emission control system, checking for leaks, and promptly addressing any issues that arise can help reduce the chances of encountering this trouble code. Regular maintenance and inspections can also help prevent such issues.