Review the 'Possible Causes' mentioned above and visually examine the corresponding wiring harness and connectors. Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
On most Cadillac vehicles the sensor is on top of the fuel tank. The P0452 code may set when replacing the fuel filter, AutoCodes.com user recommends disconnecting the car battery before replacing the fuel filter.
To diagnose the P0452 Cadillac code, it typically requires 1.0 hour of labor. The specific diagnosis time and labor rates at auto repair shops can differ based on factors such as the location, make and model of the vehicle, and even the engine type. It is common for most auto repair shops to charge between $75 and $150 per hour.
The fuel tank pressure sensor measures vapor pressure or vacuum in the Evaporative Emission (EVAP) system. The Engine Control Module (ECM) supplies a 5 V reference and a low reference circuit to the fuel tank pressure sensor. The fuel tank pressure sensor signal voltage varies depending on EVAP system pressure or vacuum. The control module also uses this fuel tank pressure signal to determine atmospheric pressure for use in the engine-off small leak test, DTC P0442. Before using this signal as an atmospheric reference, it must first be re-zeroed. The Diagnostic Trouble Code (DTC) will be set if the fuel tank pressure sensor voltage is less than 0.15 V for greater than 10 s.
Need more information on how to fix the P0452 Cadillac code? Get Access to Factory Service Manuals
Get the P0452 Cadillac code diagnosed by a professional: Find a repair shop in your area
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0452 Cadillac code? Have you replaced any parts?
Any information is appreciated. Thanks