AutoCodesJeep – P0451 Jeep

P0451 Jeep Code - Fuel Tank Pressure Sensor Range/Performance

Quick Answer

The Fuel Tank Pressure (FTP) pressure sensor detects pressure in the purge line. Common causes include Fuel Tank Pressure Sensor, Fuel Tank Pressure sensor harness is open or shorted, Fuel Tank Pressure sensor circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P0451 Jeep indicates Fuel Tank Pressure Sensor Range/Performance.
Common causes
Common causes include Fuel Tank Pressure Sensor, Fuel Tank Pressure sensor harness is open or shorted, Fuel Tank Pressure sensor circuit poor electrical connection.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 4,816
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0451 Jeep Description

The Fuel Tank Pressure (FTP) pressure sensor detects pressure in the purge line. The sensor output voltage to the Engine Control Module (ECM) increases as pressure increases.
OBDII Code P0451 Jeep - Fuel Tank Pressure Sensor Range/Performance - AutoCodes.com
P0451 Jeep Code - Fuel Tank Pressure Sensor Range/Performance

What are the Possible Causes of the DTC P0451 Jeep?

  • Fuel Tank Pressure Sensor
  • Fuel Tank Pressure sensor harness is open or shorted
  • Fuel Tank Pressure sensor circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0451 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0451 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0451 Jeep code?

Need more information on how to fix the P0451 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0451 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0451 Jeep Code

1. What does the OBDII code P0451 mean on a Jeep?

P0451 indicates a problem with the Fuel Tank Pressure Sensor, specifically that its readings are out of the expected range or not performing as intended.

2. What are the common symptoms of code P0451 on a Jeep?

Symptoms may include the Check Engine Light turning on, failed emissions tests, reduced fuel efficiency, or a noticeable fuel odor around the vehicle.

3. What causes the P0451 code in a Jeep?

Common causes include a faulty fuel tank pressure sensor, damaged or loose fuel cap, wiring or connector issues, or problems with the EVAP system components.

4. Can a loose gas cap trigger code P0451 on a Jeep?

Yes, a loose or damaged gas cap can cause pressure irregularities in the EVAP system, potentially triggering the P0451 code.

5. How do you diagnose the P0451 code on a Jeep?

Diagnosis typically involves using an OBDII scanner to verify the code, inspecting the fuel cap, checking the fuel tank pressure sensor and its wiring, and testing the EVAP system for leaks.

6. Can I drive my Jeep with the P0451 code?

While the vehicle may still be drivable, it’s not recommended to ignore the issue, as it can lead to reduced performance, increased emissions, or further damage to the EVAP system.

7. How do you fix the P0451 code on a Jeep?

Repairs may include replacing the fuel tank pressure sensor, tightening or replacing the gas cap, repairing damaged wiring, or addressing EVAP system leaks.

8. How much does it cost to repair a P0451 code on a Jeep?

Repair costs vary depending on the issue, but replacing a fuel tank pressure sensor can range from $150 to $300, while a gas cap replacement is typically under $50.

9. Can a dirty fuel tank pressure sensor cause the P0451 code?

Yes, a dirty or clogged sensor can provide incorrect readings, leading to the P0451 code.

10. What tools are needed to troubleshoot the P0451 code on a Jeep?

You’ll need an OBDII scanner, a multimeter for electrical testing, and possibly smoke testing equipment to check for EVAP system leaks.

Discuss the causes and fixes for P0451 Jeep OBDII Code

Code P0451 Jeep comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play