P0451 2017 Honda CR-V Code - Evaporative Emission Leak Check Module Pressure Sensor Range/Performance
Quick Answer
The Powertrain Control Module (PCM) monitors the Leak Detection Pressure Sensor output voltage. Common causes include Faulty Evaporative Emission (EVAP) Leak Detection Pressure Sensor (Part of Leak Check Module), EVAP Leak Detection Pressure Sensor harness is open or shorted, EVAP Leak Detection Pressure Sensor circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- P0451 2017 Honda CR-V indicates Evaporative Emission Leak Check Module Pressure Sensor Range/Performance.
- Common causes
- Common causes include Faulty Evaporative Emission (EVAP) Leak Detection Pressure Sensor (Part of Leak Check Module), EVAP Leak Detection Pressure Sensor harness is open or shorted, EVAP Leak Detection Pressure Sensor circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code P0451 2017 Honda CR-V Description
What are the Possible Causes of the DTC P0451 2017 Honda CR-V?
- Faulty Evaporative Emission (EVAP) Leak Detection Pressure Sensor (Part of Leak Check Module)
- EVAP Leak Detection Pressure Sensor harness is open or shorted
- EVAP Leak Detection Pressure Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0451 2017 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0451 2017 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0451 2017 Honda CR-V code?
Need more information on how to fix the P0451 2017 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0451 2017 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0451 2017 Honda CR-V Code
1. What does the OBDII code P0451 mean for a 2017 Honda CR-V?
P0451 indicates a problem with the evaporative emission system (EVAP) pressure sensor, specifically that its readings are out of the expected range or the performance is inconsistent.
2. What are the symptoms of a P0451 code on a 2017 Honda CR-V?
Common symptoms include an illuminated check engine light, possible fuel odor near the vehicle, and reduced fuel efficiency. However, there may be no noticeable drivability issues.
3. What causes the P0451 code to appear in a 2017 Honda CR-V?
Possible causes include a faulty EVAP pressure sensor, damaged or disconnected EVAP hoses, a malfunctioning EVAP canister, or wiring and electrical issues related to the sensor.
4. Can a loose gas cap trigger the P0451 code on a 2017 Honda CR-V?
While a loose gas cap is more commonly associated with other EVAP codes, it can sometimes contribute to an inconsistent pressure reading, so it’s worth checking.
5. How is the P0451 code diagnosed on a 2017 Honda CR-V?
A mechanic will use a scan tool to confirm the code, inspect the EVAP system for damage, test the EVAP pressure sensor, and check for wiring or connector issues.
6. Is it safe to drive a 2017 Honda CR-V with the P0451 code?
Yes, it’s generally safe to drive, but you should address the issue promptly to avoid potential emissions problems and reduced fuel efficiency.
7. How can I fix the P0451 code on a 2017 Honda CR-V?
Start by inspecting and tightening the gas cap. If the code persists, check for damaged EVAP hoses, test the EVAP pressure sensor, and inspect wiring for faults. Replace any faulty components as necessary.
8. How much does it cost to repair the P0451 code on a 2017 Honda CR-V?
Repair costs vary but typically range from $50 to $200 for parts like a gas cap or pressure sensor, plus labor costs if performed by a mechanic.
9. Can a faulty EVAP canister cause the P0451 code on a 2017 Honda CR-V?
Yes, a damaged or clogged EVAP canister can result in abnormal pressure readings that trigger the P0451 code.
10. Will clearing the P0451 code fix the issue on a 2017 Honda CR-V?
Clearing the code with a scan tool will turn off the check engine light temporarily, but if the underlying issue isn’t resolved, the code will return.
Discuss the causes and fixes for P0451 2017 Honda CR-V OBDII Code
Code P0451 2017 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
